Buku Skrap Koleksi Gambar

download Buku Skrap Koleksi Gambar

of 32

Transcript of Buku Skrap Koleksi Gambar

  • 7/27/2019 Buku Skrap Koleksi Gambar

    1/32

    INSTITUT PENDIDIKAN GURU MALAYSIA

    KAMPUS ILMU KHAS

    PROGRAM IJAZAH SARJANA MUDA PENDIDIKAN

    SEMESTER 2 AMB ILAN JANUARI 2010

    KERJA KURSUS BERASASKAN ILMU

    NAMA

    NO. KAD PENGENALAN

    NO KURSUS

    KUMPULAN

    NAMA PENSYARAH

    TARIKH HANTAR

    BUKU SKRAP KOLEKSI GAMBAR

  • 7/27/2019 Buku Skrap Koleksi Gambar

    2/32

    ISI KANDUNGAN

    Bil

    .

    Perkara Muka

    surat

    1. Koleksi gambar peralatan kekal 1-2

    2. Koleksi gambar peralatan tidak kekal 3

    3. Koleksi gambar susun atur alat dan bahan 4

    4. Konsep pertumbuhan dan perkembangan kanak-kanak 5-7

    5. Ciri-ciri pertumbuhan dan perkembangan kanak-kanak 8-9

    6. Persamaan dan perbezaan antaran pertumbuhan dan

    perkembangan kanak-kanak.

    10

    7. Prinsip-prinsip perkembangan kanak-kanak 11-14

  • 7/27/2019 Buku Skrap Koleksi Gambar

    3/32

    1. SUMBER KOLEKSIKesemua koleksi gambar peralatan kekal di bawah di ambil daripada Multifilla

    Snd. Bhd. Terdapat pelbagai jenis alatan kekal yang boleh digunakan untuk

    aktiviti-aktiviti seni visual.

    BIL ITEM(PERALATAN KEKAL)

    HURAIAN

    1

    Sharpening Tool Guide

    Set angle for the correct sharpness and roll tool

    forward and backward. Useful guide for tool

    sharpening

    2

    Mini Vice

    Strong and stable mini vice. 5cm in length X 5cm in

    height. Wobble free clamping jaw with three securing

    bars. Complete with anvil and screw holes to fixing

    onto work bench. Ideal for fine jewelery work & micro

    carving. Also available: mini hammer, chasing

    hammer, micro engraver.

    3

    ClockMechanism/numerals

    Single AA battery operated clock mechanism in a

    variety of hands design and numerals to make poster,

    CD, ceramic and acrylic clocks.

  • 7/27/2019 Buku Skrap Koleksi Gambar

    4/32

    4

    Detailing Tool

    Hard-to-find mini 3mm detailing tool to clean up wax,

    polymer clay or industrial styling clay sculptures.

    5

    Profiled Router Bits

    12 piece set in sturdy wooden display box. Shaft

    diameter> 6.3mm. Profile hardwood, chipboard,

    plastic with durable sharp tungsten carbide tool bit.

    To sharpen, use DMT diamond sharpener.

    6

    Scrapper Set

    3-piece set made of top quality English tool steel.

    Thickness:0.8mm, rectangular 125 x 45mm through

    50 x 110mm.

    7

    Hook Knife

    For hollowing deep forms such as bowls, spoons etc.

    Blade length 50 mm, overall 160mm, radius of

    curvature approx, 12mm.

    8

    Diamond sharpener

    Coarse or fine, 90 x 25 x 5mm

    http://www.multifilla.com/images/Product_highlights/Leather_sleeve.jpghttp://www.multifilla.com/images/Product_highlights/Hook_knife.jpghttp://www.multifilla.com/images/Product_highlights/Scraper_set.jpghttp://www.multifilla.com/images/Product_highlights/Leather_sleeve.jpghttp://www.multifilla.com/images/Product_highlights/Hook_knife.jpghttp://www.multifilla.com/images/Product_highlights/Scraper_set.jpghttp://www.multifilla.com/images/Product_highlights/Leather_sleeve.jpghttp://www.multifilla.com/images/Product_highlights/Hook_knife.jpghttp://www.multifilla.com/images/Product_highlights/Scraper_set.jpghttp://www.multifilla.com/images/Product_highlights/Leather_sleeve.jpghttp://www.multifilla.com/images/Product_highlights/Hook_knife.jpghttp://www.multifilla.com/images/Product_highlights/Scraper_set.jpghttp://www.multifilla.com/images/Product_highlights/Leather_sleeve.jpghttp://www.multifilla.com/images/Product_highlights/Hook_knife.jpghttp://www.multifilla.com/images/Product_highlights/Scraper_set.jpg
  • 7/27/2019 Buku Skrap Koleksi Gambar

    5/32

    9

    Sanding Sticks

    Pencil-like sanding tool for precision work. Width:

    6.5mm, length: 160mm.

    10

    1Universal HoningGuide

    The wide roller preserves the surface of the stone

    while keeping the blade from tilting. Can be used

    as an angle jig with grinding machines which have

    a tool rest. Aluminum body with brass roller. Roller

    width: 40mm, max. blade width 65mm, max. blade

    thickness 10mm.

    11

    Scorp

    For roughing-out bowls and other hollow forms. The

    blade cuts when pulled across the surface of a piece.

    Width 33mm, overall 1.180mm.

    12

    Carving Tool Set

    Compact English gouges for carving reliefs, lettering,

    figurines, etc. The blades are made of hardened

    carbon steel., fitted with stained beech handles and

    brass ferrules. Blade length 60-70mm, overall length

    approx, 180mm. Set includes 5mm #gouge, 7mm

    #5mm gouge, 9mm straight chicel, 9mm spoon

    chisel, 8 mm bent skew chisel, 5mm bent V-parting

    tool.

    13

    Metal Forming Pliers

    The set will make loops, rings, S, C, Z, L and just

    about any other shape. Set bends strip stock up to

    1/32" thick and wire up to 3/32". The strange looking

    plier at the top of the photo will even bend hardened

    music wire. Made of polished stainless steel with box

    oints that keep jaws in alignment.

    http://www.multifilla.com/images/Product_highlights/pliers.jpghttp://www.multifilla.com/images/Product_highlights/Carving_tool_set.jpghttp://www.multifilla.com/images/Product_highlights/Scrop.jpghttp://www.multifilla.com/images/Product_highlights/Universal_honing_guide.jpghttp://www.multifilla.com/images/Product_highlights/Sanding_sticks.jpghttp://www.multifilla.com/images/Product_highlights/pliers.jpghttp://www.multifilla.com/images/Product_highlights/Carving_tool_set.jpghttp://www.multifilla.com/images/Product_highlights/Scrop.jpghttp://www.multifilla.com/images/Product_highlights/Universal_honing_guide.jpghttp://www.multifilla.com/images/Product_highlights/Sanding_sticks.jpghttp://www.multifilla.com/images/Product_highlights/pliers.jpghttp://www.multifilla.com/images/Product_highlights/Carving_tool_set.jpghttp://www.multifilla.com/images/Product_highlights/Scrop.jpghttp://www.multifilla.com/images/Product_highlights/Universal_honing_guide.jpghttp://www.multifilla.com/images/Product_highlights/Sanding_sticks.jpghttp://www.multifilla.com/images/Product_highlights/pliers.jpghttp://www.multifilla.com/images/Product_highlights/Carving_tool_set.jpghttp://www.multifilla.com/images/Product_highlights/Scrop.jpghttp://www.multifilla.com/images/Product_highlights/Universal_honing_guide.jpghttp://www.multifilla.com/images/Product_highlights/Sanding_sticks.jpghttp://www.multifilla.com/images/Product_highlights/pliers.jpghttp://www.multifilla.com/images/Product_highlights/Carving_tool_set.jpghttp://www.multifilla.com/images/Product_highlights/Scrop.jpghttp://www.multifilla.com/images/Product_highlights/Universal_honing_guide.jpghttp://www.multifilla.com/images/Product_highlights/Sanding_sticks.jpg
  • 7/27/2019 Buku Skrap Koleksi Gambar

    6/32

    14

    Tool Holder

    Plastic suction cap that hold tools securely for

    convenient working.

    15

    Punched Art

    Decorative punch designs using paper, foil etc to

    apply on to stamping art, candle decoration, and card

    making.

    16

    Turn Table

    Heavy duty dual work top surface 30cm+12cm

    smooth spinning with 2 sealed bearings for sculpting,

    banding, hand building, mold making and spraying.

    17

    Micro Spirit Level

    Ideal for a leveled mold cast. Mini size glass vial in

    aluminum.

    18

    Pouring hole opener

    Pouring hole opener for plaster mold making.

    Carbon steel serrated hole opener for greenwares

    http://www.multifilla.com/images/Product_highlights/aporing.jpghttp://www.multifilla.com/images/Product_highlights/Micro_spirit_level.jpghttp://www.multifilla.com/images/Product_highlights/Turn_table.jpghttp://www.multifilla.com/images/Product_highlights/Punch_art.jpghttp://www.multifilla.com/images/Product_highlights/Tool_holder.jpghttp://www.multifilla.com/images/Product_highlights/aporing.jpghttp://www.multifilla.com/images/Product_highlights/Micro_spirit_level.jpghttp://www.multifilla.com/images/Product_highlights/Turn_table.jpghttp://www.multifilla.com/images/Product_highlights/Punch_art.jpghttp://www.multifilla.com/images/Product_highlights/Tool_holder.jpghttp://www.multifilla.com/images/Product_highlights/aporing.jpghttp://www.multifilla.com/images/Product_highlights/Micro_spirit_level.jpghttp://www.multifilla.com/images/Product_highlights/Turn_table.jpghttp://www.multifilla.com/images/Product_highlights/Punch_art.jpghttp://www.multifilla.com/images/Product_highlights/Tool_holder.jpghttp://www.multifilla.com/images/Product_highlights/aporing.jpghttp://www.multifilla.com/images/Product_highlights/Micro_spirit_level.jpghttp://www.multifilla.com/images/Product_highlights/Turn_table.jpghttp://www.multifilla.com/images/Product_highlights/Punch_art.jpghttp://www.multifilla.com/images/Product_highlights/Tool_holder.jpghttp://www.multifilla.com/images/Product_highlights/aporing.jpghttp://www.multifilla.com/images/Product_highlights/Micro_spirit_level.jpghttp://www.multifilla.com/images/Product_highlights/Turn_table.jpghttp://www.multifilla.com/images/Product_highlights/Punch_art.jpghttp://www.multifilla.com/images/Product_highlights/Tool_holder.jpg
  • 7/27/2019 Buku Skrap Koleksi Gambar

    7/32

    19

    Lino Cutter

    5 pieces safety cutter set for pull back cutting of lino

    sheet. Good design with blade storage within tool

    handle.

    20

    Microbrush

    Rounded tip. Smaller and finer than cotton buds.

    Micro brushes bend easily to any angle for the

    placement of small controlled amounts of material in

    areas of limited access. It is possible to reach areas

    that were not accessible before the introduction of the

    Micro brush.

    21

    Micromotor

    Hand set speed control or variable foot control speed

    0-35,000 RPM 110/220V 50Hz-60Hz. Hand piece

    accepts 2.35mm bits. Micro sculpting or carving use

    for master and mold making. Practical for glass

    etching and engraving. Complete with hand piece

    holder.

    22

    Investment Vibrator

    Variable speed vibrator for mold making to eliminate

    airbubbles. 220V. Vibrating platform- 11cm.

    23

    Glaze Sieve

    Rust free wooden frame 15cm X 15cm with stainless

    steel mesh #100 or #200. Suited for small volume

    sieving of glazes. slip clay and colors.Complete with

    flexible plastic scrapper.

    http://www.multifilla.com/images/Product_highlights/Glaze_sieve.jpghttp://www.multifilla.com/images/Product_highlights/investment_vibrator.jpghttp://www.multifilla.com/images/Product_highlights/Micro_motor.jpghttp://www.multifilla.com/images/Product_highlights/Microbrush.jpghttp://www.multifilla.com/images/Product_highlights/linocutter.jpghttp://www.multifilla.com/images/Product_highlights/Glaze_sieve.jpghttp://www.multifilla.com/images/Product_highlights/investment_vibrator.jpghttp://www.multifilla.com/images/Product_highlights/Micro_motor.jpghttp://www.multifilla.com/images/Product_highlights/Microbrush.jpghttp://www.multifilla.com/images/Product_highlights/linocutter.jpghttp://www.multifilla.com/images/Product_highlights/Glaze_sieve.jpghttp://www.multifilla.com/images/Product_highlights/investment_vibrator.jpghttp://www.multifilla.com/images/Product_highlights/Micro_motor.jpghttp://www.multifilla.com/images/Product_highlights/Microbrush.jpghttp://www.multifilla.com/images/Product_highlights/linocutter.jpghttp://www.multifilla.com/images/Product_highlights/Glaze_sieve.jpghttp://www.multifilla.com/images/Product_highlights/investment_vibrator.jpghttp://www.multifilla.com/images/Product_highlights/Micro_motor.jpghttp://www.multifilla.com/images/Product_highlights/Microbrush.jpghttp://www.multifilla.com/images/Product_highlights/linocutter.jpghttp://www.multifilla.com/images/Product_highlights/Glaze_sieve.jpghttp://www.multifilla.com/images/Product_highlights/investment_vibrator.jpghttp://www.multifilla.com/images/Product_highlights/Micro_motor.jpghttp://www.multifilla.com/images/Product_highlights/Microbrush.jpghttp://www.multifilla.com/images/Product_highlights/linocutter.jpg
  • 7/27/2019 Buku Skrap Koleksi Gambar

    8/32

    24

    Turning Tools

    Set of 6 piece carbon steel sharpened turning tools

    for plaster of Paris or leather hard clay. Profiles

    approx 3-4cm. Length- 27cm.

    25

    Carbon Steel Rakes

    Set of 6 piece carbon steel sharpened turning tools

    for plaster of Paris or leather hard clay. Profiles

    approx 3-4cm. Length- 27cm.

    26

    AC/DC electricturntable

    Control:Stop-start foot peddle control. Clockwise andanti-clockwise rotation.

    Wheelhead : 33cm/13" -adjustable angle. Firmlocking.

    RPM : 1- 10 RPM. Variable speed.

    Maximum loading : 50kg

    Applications: Display, welding, cutting, spraypainting. Model turning on 300 RPM modification.

    27

    Mini Clay Extruder

    Extrudes colored wax in candle decoration or polymer

    clay and bread dough craft.

    http://www.multifilla.com/images/Product_highlights/Mini_clay_extruder.jpghttp://www.multifilla.com/images/Product_highlights/ac_dc.jpghttp://www.multifilla.com/images/Product_highlights/Carbon_steel_rakes.jpghttp://www.multifilla.com/images/Product_highlights/Turning_tools.jpghttp://www.multifilla.com/images/Product_highlights/Mini_clay_extruder.jpghttp://www.multifilla.com/images/Product_highlights/ac_dc.jpghttp://www.multifilla.com/images/Product_highlights/Carbon_steel_rakes.jpghttp://www.multifilla.com/images/Product_highlights/Turning_tools.jpghttp://www.multifilla.com/images/Product_highlights/Mini_clay_extruder.jpghttp://www.multifilla.com/images/Product_highlights/ac_dc.jpghttp://www.multifilla.com/images/Product_highlights/Carbon_steel_rakes.jpghttp://www.multifilla.com/images/Product_highlights/Turning_tools.jpghttp://www.multifilla.com/images/Product_highlights/Mini_clay_extruder.jpghttp://www.multifilla.com/images/Product_highlights/ac_dc.jpghttp://www.multifilla.com/images/Product_highlights/Carbon_steel_rakes.jpghttp://www.multifilla.com/images/Product_highlights/Turning_tools.jpg
  • 7/27/2019 Buku Skrap Koleksi Gambar

    9/32

    28Cutawl. The cutting tool

    for professionals.

    The perfect portable die cutting tool for prototyping,

    box making, point of purchase display, sign making

    and model making. Just a change of saw blade cuts

    many materials even in stacks precisely clean and

    neat to eliminate sanding and finishing twice. The cut

    is so close, the work is punched out and fit back into

    place like a jigsaw puzzle.

    Model : K11, USA original.

    Motor : 230V AC- 50- 60 Hz

    Optional : Circle cutting attachment cut from 3/4" to

    48" diameter.

    Weight : 16 lbs

    Blades : 360 degree swivel operation. Wide blade

    selection. Saw blades do not require a pilot hole and

    cutting can begin anywhere.Materials cut : Any plastic, acrylic foam boards,

    plywood, particle boards, rubber, leather, aluminum,

    zinc, brass sheets and much more.

    29

    Rubber Comb

    Flexible thick gauge rubber comb used by folk artist in

    duplicating tree bark and other decorative effects.

    30

    Sinker Molds

    Melt & cast sinkers from scrap lead. Quick and fun.

    Work in well ventilated area. Spray mold silicon

    release for perfect cast. These are hard to find quality

    molds.

    31

    Flow Pencil

    The FP-1/23" Flow Pencil is an ideal instrument to

    flow lines onto a horizontal surface. Without masking

    or overspray, the operator can stripe models, wood

    products, metal products, metal parts and other

    surfaces needing decorative trim. Nib size determines

    width of stripe.

    http://www.multifilla.com/images/Product_highlights/Flow_set.jpghttp://www.multifilla.com/images/Product_highlights/Sinker_molds.jpghttp://www.multifilla.com/images/Product_highlights/Rubber_comb.jpghttp://www.multifilla.com/images/Product_highlights/cutawl.jpghttp://www.multifilla.com/images/Product_highlights/Flow_set.jpghttp://www.multifilla.com/images/Product_highlights/Sinker_molds.jpghttp://www.multifilla.com/images/Product_highlights/Rubber_comb.jpghttp://www.multifilla.com/images/Product_highlights/cutawl.jpghttp://www.multifilla.com/images/Product_highlights/Flow_set.jpghttp://www.multifilla.com/images/Product_highlights/Sinker_molds.jpghttp://www.multifilla.com/images/Product_highlights/Rubber_comb.jpghttp://www.multifilla.com/images/Product_highlights/cutawl.jpghttp://www.multifilla.com/images/Product_highlights/Flow_set.jpghttp://www.multifilla.com/images/Product_highlights/Sinker_molds.jpghttp://www.multifilla.com/images/Product_highlights/Rubber_comb.jpghttp://www.multifilla.com/images/Product_highlights/cutawl.jpg
  • 7/27/2019 Buku Skrap Koleksi Gambar

    10/32

    32

    Glass Edging andPolishing Machine

    Glass Edging and polishing machine, Pearl Brand,

    Direct Motor drive 1/6 H,P ,1440 RPM, 220/230 Volts.

    A.C. Rating, C Water Tank on top, Durable and

    sturdy with emery stone.

    33

    Glass Edging &Polishing

    Glass polishing Machine Double disc, Pearl brand

    Single phase, 1440RPM, 220/230 volts, 0.5 AMP,

    rating C, 100 watts 0.15 H.p.

    -

    34

    File for Wax

    File for wax work, Anchor brand, set of 6pcs, Size:

    14cm in Plastic wallet.

    35

    Beading Kit

    Beading tool kit. Ideal for amateur beaders. Contains

    Plastic Bead Board, Tweezer, 80mm Brass Gauge,

    Round plier, Fine Point Scissor, Knotting Needle, Half

    Round Plier, Side Cutting Plier.

    36

    Brush Cleaning Pad

    Practical scrub pad that allows dirt to sink to the

    bottom . Use with brush cleaner to keep brushes

    clean and prolong expensive brush lifespan.

    http://www.multifilla.com/images/Product_highlights/Brush_pad_for_cleaning.jpghttp://www.multifilla.com/images/Product_highlights/Beading_tool_kit.jpghttp://www.multifilla.com/images/Product_highlights/File_for_wax.jpghttp://www.multifilla.com/images/Product_highlights/Glass_edging2.jpghttp://www.multifilla.com/images/Product_highlights/Glass_edging.jpghttp://www.multifilla.com/images/Product_highlights/Brush_pad_for_cleaning.jpghttp://www.multifilla.com/images/Product_highlights/Beading_tool_kit.jpghttp://www.multifilla.com/images/Product_highlights/File_for_wax.jpghttp://www.multifilla.com/images/Product_highlights/Glass_edging2.jpghttp://www.multifilla.com/images/Product_highlights/Glass_edging.jpghttp://www.multifilla.com/images/Product_highlights/Brush_pad_for_cleaning.jpghttp://www.multifilla.com/images/Product_highlights/Beading_tool_kit.jpghttp://www.multifilla.com/images/Product_highlights/File_for_wax.jpghttp://www.multifilla.com/images/Product_highlights/Glass_edging2.jpghttp://www.multifilla.com/images/Product_highlights/Glass_edging.jpghttp://www.multifilla.com/images/Product_highlights/Brush_pad_for_cleaning.jpghttp://www.multifilla.com/images/Product_highlights/Beading_tool_kit.jpghttp://www.multifilla.com/images/Product_highlights/File_for_wax.jpghttp://www.multifilla.com/images/Product_highlights/Glass_edging2.jpghttp://www.multifilla.com/images/Product_highlights/Glass_edging.jpghttp://www.multifilla.com/images/Product_highlights/Brush_pad_for_cleaning.jpghttp://www.multifilla.com/images/Product_highlights/Beading_tool_kit.jpghttp://www.multifilla.com/images/Product_highlights/File_for_wax.jpghttp://www.multifilla.com/images/Product_highlights/Glass_edging2.jpghttp://www.multifilla.com/images/Product_highlights/Glass_edging.jpg
  • 7/27/2019 Buku Skrap Koleksi Gambar

    11/32

    37

    Extendable MicroSculpture Tool Holder

    Unique hollow tool holder that clamp with sliding

    locking device. Tool are hand forged from high

    carbon steel to lengths of 8cm for the extra reach in

    sculpting hard to reach area. Holder sold without tool.

    38

    Quick Change

    Micro surgery blades are easily clamped firmly to

    10cm holder. Complete with transparent safety cover

    for easy identification of blades profile- 4 designs.

    39

    Circular Glass Cutter

    Score glass, mirror and ceramics to cut perfect circles

    in diameters ranging from 6cm to 40cm. Adjustable

    diamond cutter makes scoring easy for amateur on

    first attempt

    40

    Air Brush Kit

    Affordable student's kit venturing into creative field of

    airbrushing. Lightweight airbrush for water, oil and

    varnishing. Single action, external mix gun operates

    on 15-50psi with adjustable spray patterns from 3/4"

    to 2".

    Kit contents: 1 light weight airbrush, 1 adjustable

    value pressure cap, two 30ml glass paint jars, 1

    airhose (1m), one 1/4 reducer connector, 1 wrench, 1

    pipette.

    41

    Rotary Tumbler

    Set tumbling time 0-120 minutes with auto reverse

    function for through tumbling. Adjustable to 5 speedcontrol for fine polishing to suit material size. See-

    through tumbler for inspection.

    http://www.multifilla.com/images/Product_highlights/Rotary_tumbler.jpghttp://www.multifilla.com/images/Product_highlights/Air_brush_kit.jpghttp://www.multifilla.com/images/Product_highlights/Circular_glass_cutter.gifhttp://www.multifilla.com/images/Product_highlights/quickchangemicroblade2.jpghttp://www.multifilla.com/images/Product_highlights/Quickchangemicroblade.jpghttp://www.multifilla.com/images/Product_highlights/Extendable_microtool_holder.jpghttp://www.multifilla.com/images/Product_highlights/Rotary_tumbler.jpghttp://www.multifilla.com/images/Product_highlights/Air_brush_kit.jpghttp://www.multifilla.com/images/Product_highlights/Circular_glass_cutter.gifhttp://www.multifilla.com/images/Product_highlights/quickchangemicroblade2.jpghttp://www.multifilla.com/images/Product_highlights/Quickchangemicroblade.jpghttp://www.multifilla.com/images/Product_highlights/Extendable_microtool_holder.jpghttp://www.multifilla.com/images/Product_highlights/Rotary_tumbler.jpghttp://www.multifilla.com/images/Product_highlights/Air_brush_kit.jpghttp://www.multifilla.com/images/Product_highlights/Circular_glass_cutter.gifhttp://www.multifilla.com/images/Product_highlights/quickchangemicroblade2.jpghttp://www.multifilla.com/images/Product_highlights/Quickchangemicroblade.jpghttp://www.multifilla.com/images/Product_highlights/Extendable_microtool_holder.jpghttp://www.multifilla.com/images/Product_highlights/Rotary_tumbler.jpghttp://www.multifilla.com/images/Product_highlights/Air_brush_kit.jpghttp://www.multifilla.com/images/Product_highlights/Circular_glass_cutter.gifhttp://www.multifilla.com/images/Product_highlights/quickchangemicroblade2.jpghttp://www.multifilla.com/images/Product_highlights/Quickchangemicroblade.jpghttp://www.multifilla.com/images/Product_highlights/Extendable_microtool_holder.jpghttp://www.multifilla.com/images/Product_highlights/Rotary_tumbler.jpghttp://www.multifilla.com/images/Product_highlights/Air_brush_kit.jpghttp://www.multifilla.com/images/Product_highlights/Circular_glass_cutter.gifhttp://www.multifilla.com/images/Product_highlights/quickchangemicroblade2.jpghttp://www.multifilla.com/images/Product_highlights/Quickchangemicroblade.jpghttp://www.multifilla.com/images/Product_highlights/Extendable_microtool_holder.jpghttp://www.multifilla.com/images/Product_highlights/Rotary_tumbler.jpghttp://www.multifilla.com/images/Product_highlights/Air_brush_kit.jpghttp://www.multifilla.com/images/Product_highlights/Circular_glass_cutter.gifhttp://www.multifilla.com/images/Product_highlights/quickchangemicroblade2.jpghttp://www.multifilla.com/images/Product_highlights/Quickchangemicroblade.jpghttp://www.multifilla.com/images/Product_highlights/Extendable_microtool_holder.jpg
  • 7/27/2019 Buku Skrap Koleksi Gambar

    12/32

    42

    Design punches

    Assorted design punches- 63 pieces in copper

    tooling, metal stamping, industrial styling clay, wood

    and leather embossing. Length: 65mm. Diameter:2mm.

    43

    Display Turntable

    Slow revolving display turntable for your

    masterpieces. Turntable diameter: 13cm, battery

    operated and 31cm, AC and battery operated.

    44

    Swivel Head Pin Tong

    4 mouth pin tong for delicate drilling with fine drill bits.

    Beads drilling and model making easy with swivel

    head.

    45

    Mold Maker's Spatula

    Curved end pry silicon and PU molds away frommodel for safe cutting. Recommended use German

    surgical craft blade for precise mold splitting. See

    item 48 in the product highlights.

    46

    Alphabet/numberpunches

    Mine 2 mm Carbon steel punches for metal stamping

    of sheet, tools marking and keys.

    http://www.multifilla.com/images/Product_highlights/Alphabet_punch.gifhttp://www.multifilla.com/images/Product_highlights/spatula2.jpghttp://www.multifilla.com/images/Product_highlights/spatula.jpghttp://www.multifilla.com/images/Product_highlights/Swiwel_head_pin_tong.jpghttp://www.multifilla.com/images/Product_highlights/Display_turntable.jpghttp://www.multifilla.com/images/Product_highlights/Design_punches.jpghttp://www.multifilla.com/images/Product_highlights/Alphabet_punch.gifhttp://www.multifilla.com/images/Product_highlights/spatula2.jpghttp://www.multifilla.com/images/Product_highlights/spatula.jpghttp://www.multifilla.com/images/Product_highlights/Swiwel_head_pin_tong.jpghttp://www.multifilla.com/images/Product_highlights/Display_turntable.jpghttp://www.multifilla.com/images/Product_highlights/Design_punches.jpghttp://www.multifilla.com/images/Product_highlights/Alphabet_punch.gifhttp://www.multifilla.com/images/Product_highlights/spatula2.jpghttp://www.multifilla.com/images/Product_highlights/spatula.jpghttp://www.multifilla.com/images/Product_highlights/Swiwel_head_pin_tong.jpghttp://www.multifilla.com/images/Product_highlights/Display_turntable.jpghttp://www.multifilla.com/images/Product_highlights/Design_punches.jpghttp://www.multifilla.com/images/Product_highlights/Alphabet_punch.gifhttp://www.multifilla.com/images/Product_highlights/spatula2.jpghttp://www.multifilla.com/images/Product_highlights/spatula.jpghttp://www.multifilla.com/images/Product_highlights/Swiwel_head_pin_tong.jpghttp://www.multifilla.com/images/Product_highlights/Display_turntable.jpghttp://www.multifilla.com/images/Product_highlights/Design_punches.jpghttp://www.multifilla.com/images/Product_highlights/Alphabet_punch.gifhttp://www.multifilla.com/images/Product_highlights/spatula2.jpghttp://www.multifilla.com/images/Product_highlights/spatula.jpghttp://www.multifilla.com/images/Product_highlights/Swiwel_head_pin_tong.jpghttp://www.multifilla.com/images/Product_highlights/Display_turntable.jpghttp://www.multifilla.com/images/Product_highlights/Design_punches.jpghttp://www.multifilla.com/images/Product_highlights/Alphabet_punch.gifhttp://www.multifilla.com/images/Product_highlights/spatula2.jpghttp://www.multifilla.com/images/Product_highlights/spatula.jpghttp://www.multifilla.com/images/Product_highlights/Swiwel_head_pin_tong.jpghttp://www.multifilla.com/images/Product_highlights/Display_turntable.jpghttp://www.multifilla.com/images/Product_highlights/Design_punches.jpg
  • 7/27/2019 Buku Skrap Koleksi Gambar

    13/32

    47

    Wire Cutter

    Mighty and sturdy bolted to work bench for shear

    cutting standard lengths wire up to 5mm diameter.

    Adjustable length gauge and long leverage handle

    makes repetitive cutting less taxing. A useful and

    hard to find gadget for jewellers, metal sculptors andmodellers.

    48

    Micro End Mill/RouterBit

    Tungsten bits sizes 1mm and below for engraving or

    3D carving / routing.

    49

    Drilling Vice

    Ever tried drilling round beads, pearl without

    accidents? Drilling vice with different hole sizes for

    quick clamping and release ensures accurate hole

    drilling of round objects.

    50

    Tool Set

    4" Blue wire steel 2mm to 5mm diameter for tool

    making. Makes fine craft tools for miniature wood

    turning, classic stamps with appropriate heat

    treatment and tempering.

    51

    Micro Tools

    Hard to find micro tools for miniature sculpturing of

    Industrial Styling Clay, polymer clay, wax or paper

    clay. Individually hand forged from high carbon steel

    or stainless steel. Hundreds of designs to suit project

    requirements.

    http://www.multifilla.com/images/Product_highlights/Micro_tools.jpghttp://www.multifilla.com/images/Product_highlights/Tools_steel.gifhttp://www.multifilla.com/images/Product_highlights/Drilling_vice.gifhttp://www.multifilla.com/images/Product_highlights/Micro_bit.gifhttp://www.multifilla.com/images/Product_highlights/wire_cutter.gifhttp://www.multifilla.com/images/Product_highlights/Micro_tools.jpghttp://www.multifilla.com/images/Product_highlights/Tools_steel.gifhttp://www.multifilla.com/images/Product_highlights/Drilling_vice.gifhttp://www.multifilla.com/images/Product_highlights/Micro_bit.gifhttp://www.multifilla.com/images/Product_highlights/wire_cutter.gifhttp://www.multifilla.com/images/Product_highlights/Micro_tools.jpghttp://www.multifilla.com/images/Product_highlights/Tools_steel.gifhttp://www.multifilla.com/images/Product_highlights/Drilling_vice.gifhttp://www.multifilla.com/images/Product_highlights/Micro_bit.gifhttp://www.multifilla.com/images/Product_highlights/wire_cutter.gifhttp://www.multifilla.com/images/Product_highlights/Micro_tools.jpghttp://www.multifilla.com/images/Product_highlights/Tools_steel.gifhttp://www.multifilla.com/images/Product_highlights/Drilling_vice.gifhttp://www.multifilla.com/images/Product_highlights/Micro_bit.gifhttp://www.multifilla.com/images/Product_highlights/wire_cutter.gifhttp://www.multifilla.com/images/Product_highlights/Micro_tools.jpghttp://www.multifilla.com/images/Product_highlights/Tools_steel.gifhttp://www.multifilla.com/images/Product_highlights/Drilling_vice.gifhttp://www.multifilla.com/images/Product_highlights/Micro_bit.gifhttp://www.multifilla.com/images/Product_highlights/wire_cutter.gif
  • 7/27/2019 Buku Skrap Koleksi Gambar

    14/32

    52

    Mini Craft Knife

    Handy craft knife cuts, shaves, carve and other craft

    use.

    53

    PVC Pneumaticpressure demolding

    cylindrical candle mold

    Optional pouring stand.

    Mold sixes- 28mm x 25cm, 28mm x 30cm.

    Options:1)Candle pouring stand-38 cava ties.2)

    pneumatic foot pump.

    Wooden Candle Molds

    2 part screw fixed candle mold complete with base.

    Cast rugged square or rectangular candles. Plane tosmoothness with surform planner.

    Sizes: 4cm x 4cm x 20cm, 6cm x 8.5cm x 15cm,

    7.2cm x 7.2cm x 15cm.

    54

    Cut Throat Razor Blade

    Flat on one side and contour on the other to cut and

    separate polymer cane cleanly. Sharp thin high

    carbon steel razor blade with strong leather tong

    handle.

    55

    Micro Surgical Knife

    Surgical high carbon steel micro super sharp knife.

    Width blade 1.5 mm to 3mm set in slip resistant

    knurled metal handle. Micro Surgical knife carves

    wood, polymer clay, Milliput epoxy putty or paper

    clay. Many uses in polyurethane & silicon mold

    dissection

    56Wax / clay sculpting

    tool

    Carving set includes five double-ended stainless-

    steel carvers with round, triangular, square, tear-drop

    and needle-point tips. Sharp cutting edges and

    knurled gripping surfaces give the control necessary

    for precision patern & model making.

    http://www.multifilla.com/images/Product_highlights/Carving_set.jpghttp://www.multifilla.com/images/Product_highlights/micro_surgical_knife.jpghttp://www.multifilla.com/images/Product_highlights/Knife.jpghttp://www.multifilla.com/images/Product_highlights/plastic_tubes.jpghttp://www.multifilla.com/images/Product_highlights/Craft_knife.jpghttp://www.multifilla.com/images/Product_highlights/Carving_set.jpghttp://www.multifilla.com/images/Product_highlights/micro_surgical_knife.jpghttp://www.multifilla.com/images/Product_highlights/Knife.jpghttp://www.multifilla.com/images/Product_highlights/plastic_tubes.jpghttp://www.multifilla.com/images/Product_highlights/Craft_knife.jpghttp://www.multifilla.com/images/Product_highlights/Carving_set.jpghttp://www.multifilla.com/images/Product_highlights/micro_surgical_knife.jpghttp://www.multifilla.com/images/Product_highlights/Knife.jpghttp://www.multifilla.com/images/Product_highlights/plastic_tubes.jpghttp://www.multifilla.com/images/Product_highlights/Craft_knife.jpghttp://www.multifilla.com/images/Product_highlights/Carving_set.jpghttp://www.multifilla.com/images/Product_highlights/micro_surgical_knife.jpghttp://www.multifilla.com/images/Product_highlights/Knife.jpghttp://www.multifilla.com/images/Product_highlights/plastic_tubes.jpghttp://www.multifilla.com/images/Product_highlights/Craft_knife.jpghttp://www.multifilla.com/images/Product_highlights/Carving_set.jpghttp://www.multifilla.com/images/Product_highlights/micro_surgical_knife.jpghttp://www.multifilla.com/images/Product_highlights/Knife.jpghttp://www.multifilla.com/images/Product_highlights/plastic_tubes.jpghttp://www.multifilla.com/images/Product_highlights/Craft_knife.jpg
  • 7/27/2019 Buku Skrap Koleksi Gambar

    15/32

    57

    Micro Carving Set

    Micro carving tools made of the finest quality tool

    steel, fully sharpened and honed to an incredibly

    sharp edge.

    58

    Stainless Steel

    Sturdy tool for Industrial Styling Clay modeling or

    copper tooling. Forged and machined from solid one

    piece steel fitted with a comfortable plastic handle.

    Over 30 designs to choose.

    59

    Pintong

    Solves micro drill bits of 0.3mm to 1mm breakage if

    using power drilling. These Pintongs manually, shivel

    or spring operated mounted with micro bits enable

    slow hand drilling in metal, wood, plastics or polymer

    clay.

    60

    Balance Scale

    Antique balance scale used by the general post

    office. Weighs up to 2kg with counter balancing

    weight. Accurate unlike spring scale. No spring

    failure. A durable scale.

    61

    Pre punched designs

    Assorted pre punched colored designs for creative

    card designing. Need not invest in art punches. Pack

    complete with decorative background card, woodentool, EVA pad and transparent modeling glue. Plain

    card and envelope optional. Pack sufficient to create

    over 50 cards.

    http://www.multifilla.com/images/Product_highlights/Q130.jpghttp://www.multifilla.com/images/Product_highlights/Q125.jpghttp://www.multifilla.com/images/Product_highlights/DSC02128.JPGhttp://www.multifilla.com/images/Product_highlights/StainlessSteelTools.jpghttp://www.multifilla.com/images/Product_highlights/Micro_carving_set.jpghttp://www.multifilla.com/images/Product_highlights/Q130.jpghttp://www.multifilla.com/images/Product_highlights/Q125.jpghttp://www.multifilla.com/images/Product_highlights/DSC02128.JPGhttp://www.multifilla.com/images/Product_highlights/StainlessSteelTools.jpghttp://www.multifilla.com/images/Product_highlights/Micro_carving_set.jpghttp://www.multifilla.com/images/Product_highlights/Q130.jpghttp://www.multifilla.com/images/Product_highlights/Q125.jpghttp://www.multifilla.com/images/Product_highlights/DSC02128.JPGhttp://www.multifilla.com/images/Product_highlights/StainlessSteelTools.jpghttp://www.multifilla.com/images/Product_highlights/Micro_carving_set.jpghttp://www.multifilla.com/images/Product_highlights/Q130.jpghttp://www.multifilla.com/images/Product_highlights/Q125.jpghttp://www.multifilla.com/images/Product_highlights/DSC02128.JPGhttp://www.multifilla.com/images/Product_highlights/StainlessSteelTools.jpghttp://www.multifilla.com/images/Product_highlights/Micro_carving_set.jpghttp://www.multifilla.com/images/Product_highlights/Q130.jpghttp://www.multifilla.com/images/Product_highlights/Q125.jpghttp://www.multifilla.com/images/Product_highlights/DSC02128.JPGhttp://www.multifilla.com/images/Product_highlights/StainlessSteelTools.jpghttp://www.multifilla.com/images/Product_highlights/Micro_carving_set.jpg
  • 7/27/2019 Buku Skrap Koleksi Gambar

    16/32

    62

    Wood Chopper

    Splits wood into dowel size splints. Handy heavy

    carbon steel 23cm length, 10cm blade hand forged to

    taper from 1cm shank to sharpness straight grind

    functioning as a wedge. Honed polished ready to use.

    Tap with wood mallet to split boards along grain.

    63

    Hole Opener

    Metal Christmas tree like step up hole sizes from

    9mm to 20mm for opening holes in green

    wares/clay sculptures.

    64

    Socket Chisels

    Extremely hard to find socket chisels are no longer

    produced. Like an inverted cone, it holds firmly

    without splitting the wooden handle. Chisels often

    made from cast steel or high carbon steel are proven

    in performance with hard timber species. Wide

    selection of crescent or straight edge in various

    widths, socket chisels are available in factory ground

    or sharpened and honed. Wooden handle with brass

    ferrule is optional as factory ground socket chisels

    are without handles.

    65

    Cloth peg

    Miniature wooden peg to fulfill your fantasies.

    66

    Double scoop

    Stainless steel double ended scoops. Edges

    sharpened for easy gauge of polymer clay or wax

    sculptures. Scoop diameters 3.5mm, 4mm, 5mm &

    7mm.

    http://www.multifilla.com/images/Product_highlights/28.jpghttp://www.multifilla.com/images/Product_highlights/38.jpghttp://www.multifilla.com/images/Product_highlights/09.jpghttp://www.multifilla.com/images/Product_highlights/02.jpghttp://www.multifilla.com/images/Product_highlights/19.jpghttp://www.multifilla.com/images/Product_highlights/28.jpghttp://www.multifilla.com/images/Product_highlights/38.jpghttp://www.multifilla.com/images/Product_highlights/09.jpghttp://www.multifilla.com/images/Product_highlights/02.jpghttp://www.multifilla.com/images/Product_highlights/19.jpghttp://www.multifilla.com/images/Product_highlights/28.jpghttp://www.multifilla.com/images/Product_highlights/38.jpghttp://www.multifilla.com/images/Product_highlights/09.jpghttp://www.multifilla.com/images/Product_highlights/02.jpghttp://www.multifilla.com/images/Product_highlights/19.jpghttp://www.multifilla.com/images/Product_highlights/28.jpghttp://www.multifilla.com/images/Product_highlights/38.jpghttp://www.multifilla.com/images/Product_highlights/09.jpghttp://www.multifilla.com/images/Product_highlights/02.jpghttp://www.multifilla.com/images/Product_highlights/19.jpghttp://www.multifilla.com/images/Product_highlights/28.jpghttp://www.multifilla.com/images/Product_highlights/38.jpghttp://www.multifilla.com/images/Product_highlights/09.jpghttp://www.multifilla.com/images/Product_highlights/02.jpghttp://www.multifilla.com/images/Product_highlights/19.jpg
  • 7/27/2019 Buku Skrap Koleksi Gambar

    17/32

    67

    Saw Frame

    Pinewood frame to hold work piece for intricate

    sawing. Fix with G clamp provided as a complete set.

    Adjustable fret saw optional.

    68

    Framing Saw

    Sets length + width with lockable angle setting, this

    portable hand saw cuts perfect angles for DIY

    framing and boxes. Cast iron body, framing saw can

    be fixed firmly onto wood table.

    69

    Axe Head

    These antique axe head used by wood craftsmen

    available with or without handles. Sharpened and

    polish for immediate use.

    70

    Dowel

    Chinese hardwood dowel tapered turned both ends

    for ergonomic grip. Sawn half to fit socket chisel and

    with brass ferrule makes perfect handle. As

    drumsticks. tapered end maximizes drum surface

    contact. As wind chimes for soothing wood harmony

    sound. Unlimited craft applications. Polished & waxed

    surfaces.

    Length : 30cm Centre diameter : 25cm Optional

    Brass Ferrule : OD 26mm ID 23mm. Length: 12mm

    71

    Dough cutter

    Stainless steel cutter / scrapper for dough and clay

    work. Thick gauge stainless steel dressed edge is

    perfect for two hands wood scrapping.

    Size : 13.5cm width X 10cm height

    http://www.multifilla.com/images/Product_highlights/DSC03320.JPGhttp://www.multifilla.com/images/Product_highlights/kdop.jpghttp://www.multifilla.com/images/Product_highlights/06.jpghttp://www.multifilla.com/images/Product_highlights/08.jpghttp://www.multifilla.com/images/Product_highlights/11.jpghttp://www.multifilla.com/images/Product_highlights/DSC03320.JPGhttp://www.multifilla.com/images/Product_highlights/kdop.jpghttp://www.multifilla.com/images/Product_highlights/06.jpghttp://www.multifilla.com/images/Product_highlights/08.jpghttp://www.multifilla.com/images/Product_highlights/11.jpghttp://www.multifilla.com/images/Product_highlights/DSC03320.JPGhttp://www.multifilla.com/images/Product_highlights/kdop.jpghttp://www.multifilla.com/images/Product_highlights/06.jpghttp://www.multifilla.com/images/Product_highlights/08.jpghttp://www.multifilla.com/images/Product_highlights/11.jpghttp://www.multifilla.com/images/Product_highlights/DSC03320.JPGhttp://www.multifilla.com/images/Product_highlights/kdop.jpghttp://www.multifilla.com/images/Product_highlights/06.jpghttp://www.multifilla.com/images/Product_highlights/08.jpghttp://www.multifilla.com/images/Product_highlights/11.jpghttp://www.multifilla.com/images/Product_highlights/DSC03320.JPGhttp://www.multifilla.com/images/Product_highlights/kdop.jpghttp://www.multifilla.com/images/Product_highlights/06.jpghttp://www.multifilla.com/images/Product_highlights/08.jpghttp://www.multifilla.com/images/Product_highlights/11.jpg
  • 7/27/2019 Buku Skrap Koleksi Gambar

    18/32

    72

    Profile guillotine

    Compact 17cm X 7.5cm pattern cutter used in past

    photo shops for the decorative fringes. A hard to find

    decorative cutter with many uses in scrape booking,

    quilling, or punch art. Strong sturdy base with 4 screw

    holes to stabilize cutter on worktable.

    73

    Dapping cutter

    22 piece set cutter set of hardened tool steel 2.8mm

    to 22.2mm in wood display stand. Strike punch lightly

    to create surface design. Strike hard to punch out

    disc from soft metal up to 28 gauge. Made in Europe.

    74

    Carving / Engraving Set

    50pcs in double layer storage case for stone

    engraving or wood carving. Sharp carbon tool steel in

    various profiles.

    75

    Bead crimping pliers

    Available crimping pliers for 1mm, 2-3mm & 3mm

    Bead size. Crimp tubes into rounded crimps to hold

    securely cord, beads and accessories. Dual duty jaws

    to crease crimp tube and final rounding of tube.

    76

    Peddinghaus 5 pieceforming Hammer.

    This 5 piece high quality assortment from Peddington

    Germany has the right hammers to meet your metalforming needs.

    a) Gold smith's hammer

    b) Raising hammer

    c) Planishing hammer

    d) Bordering hammer

    e) Nylon head mallet

    http://www.multifilla.com/images/Product_highlights/18.jpghttp://www.multifilla.com/images/Product_highlights/19.jpghttp://www.multifilla.com/images/Product_highlights/54.jpghttp://www.multifilla.com/images/Product_highlights/30.jpghttp://www.multifilla.com/images/Product_highlights/DSC03309.JPGhttp://www.multifilla.com/images/Product_highlights/18.jpghttp://www.multifilla.com/images/Product_highlights/19.jpghttp://www.multifilla.com/images/Product_highlights/54.jpghttp://www.multifilla.com/images/Product_highlights/30.jpghttp://www.multifilla.com/images/Product_highlights/DSC03309.JPGhttp://www.multifilla.com/images/Product_highlights/18.jpghttp://www.multifilla.com/images/Product_highlights/19.jpghttp://www.multifilla.com/images/Product_highlights/54.jpghttp://www.multifilla.com/images/Product_highlights/30.jpghttp://www.multifilla.com/images/Product_highlights/DSC03309.JPGhttp://www.multifilla.com/images/Product_highlights/18.jpghttp://www.multifilla.com/images/Product_highlights/19.jpghttp://www.multifilla.com/images/Product_highlights/54.jpghttp://www.multifilla.com/images/Product_highlights/30.jpghttp://www.multifilla.com/images/Product_highlights/DSC03309.JPGhttp://www.multifilla.com/images/Product_highlights/18.jpghttp://www.multifilla.com/images/Product_highlights/19.jpghttp://www.multifilla.com/images/Product_highlights/54.jpghttp://www.multifilla.com/images/Product_highlights/30.jpghttp://www.multifilla.com/images/Product_highlights/DSC03309.JPG
  • 7/27/2019 Buku Skrap Koleksi Gambar

    19/32

    77

    Multifilla Stainless SteelCarver

    Set of 5 piece each with different profile at each end

    totaling 10 profiles. Knurled at both ends for better

    grip, these carvers are suited for wax carving,

    polymer clay, industrial styling clay or natural clay

    sculpting. This house brand tool set profiles are the

    preferred choice for professionals and beginners at

    student price.

    http://www.multifilla.com/images/Product_highlights/DSC02173.JPG
  • 7/27/2019 Buku Skrap Koleksi Gambar

    20/32

    1. SUMBER KOLEKSI

    Kesemua koleksi gambar peralatan tidak kekal di bawah di ambil daripada

    Multifilla Snd. Bhd. Terdapat pelbagai jenis alatan tidak kekal yang boleh

    digunakan untuk aktiviti-aktiviti seni visual.

    BIL ITEM(PERALATAN

    TIDAK KEKAL)

    HURAIAN

    1

    Porceline tilesRound Tiles-Glazed

    9cm / 3.03 inch X 4mm thick- England

    5.2cm/2 inch X 3mm thick- Japan

    4.5cm/ 1.5 inch X 3mm thick- Japan

    2

    Round Tiles-Un-glazed10cm/ 3 inch X5mm thick- USA

    Oval tile-Glazed

    5.5cm/ 2 inch X 3mm thick- Japan

    4cm/ 1.5 inch X 3mm thick- Japan

    3

    Square

    Chamfered polished edge glass tiles in various sizes for

    stain glass painting. Ideal for press flowers setting as

    well.

    Square: 10cm X 10cm

    http://www.multifilla.com/images/Product_highlights/Glass_tile1.jpghttp://www.multifilla.com/images/Product_highlights/Porceline_tile2.jpghttp://www.multifilla.com/images/Product_highlights/Porceline_tile1.jpghttp://www.multifilla.com/images/Product_highlights/Glass_tile1.jpghttp://www.multifilla.com/images/Product_highlights/Porceline_tile2.jpghttp://www.multifilla.com/images/Product_highlights/Porceline_tile1.jpghttp://www.multifilla.com/images/Product_highlights/Glass_tile1.jpghttp://www.multifilla.com/images/Product_highlights/Porceline_tile2.jpghttp://www.multifilla.com/images/Product_highlights/Porceline_tile1.jpg
  • 7/27/2019 Buku Skrap Koleksi Gambar

    21/32

    Rectangle

    TriangleGlass Tiles

    Round: 15.8cm

    Rectangle: 7.5cm X 15cm

    Triangle

    10cm X 10cm X 10cm

    12.5cm X 12.5cm X 12.5cm

    4

    Reusable RubberMold

    Melt and cast own molds with Gelfex reusable rubber.Available in soft and hard grades. A product of the U.K.

    5

    Multi-purposeSculptural Cement

    Slow drying white cement for sculptures, tiling, grouting

    and wall patching. To use, mix with sufficient water for astiff paste. Larger sculptural use with cellulose fibers or

    fiberglass strands.

    6

    Ceramic/ BisqueWare

    Cast from fine American slip clay. Accepts non-fired

    colors and super gloss as decorative wares. Ceramicfunctional wares paint with velvet under glazes and

    transparent gloss glaze fired to recommended cone

    temperature

    http://www.multifilla.com/images/Product_highlights/Bisque_ware.jpghttp://www.multifilla.com/images/Product_highlights/sculpture_cement.jpghttp://www.multifilla.com/images/Product_highlights/Plaster_paris.jpghttp://www.multifilla.com/images/Product_highlights/Glass_tile3.jpghttp://www.multifilla.com/images/Product_highlights/Glass_tile2.jpghttp://www.multifilla.com/images/Product_highlights/Bisque_ware.jpghttp://www.multifilla.com/images/Product_highlights/sculpture_cement.jpghttp://www.multifilla.com/images/Product_highlights/Plaster_paris.jpghttp://www.multifilla.com/images/Product_highlights/Glass_tile3.jpghttp://www.multifilla.com/images/Product_highlights/Glass_tile2.jpghttp://www.multifilla.com/images/Product_highlights/Bisque_ware.jpghttp://www.multifilla.com/images/Product_highlights/sculpture_cement.jpghttp://www.multifilla.com/images/Product_highlights/Plaster_paris.jpghttp://www.multifilla.com/images/Product_highlights/Glass_tile3.jpghttp://www.multifilla.com/images/Product_highlights/Glass_tile2.jpghttp://www.multifilla.com/images/Product_highlights/Bisque_ware.jpghttp://www.multifilla.com/images/Product_highlights/sculpture_cement.jpghttp://www.multifilla.com/images/Product_highlights/Plaster_paris.jpghttp://www.multifilla.com/images/Product_highlights/Glass_tile3.jpghttp://www.multifilla.com/images/Product_highlights/Glass_tile2.jpghttp://www.multifilla.com/images/Product_highlights/Bisque_ware.jpghttp://www.multifilla.com/images/Product_highlights/sculpture_cement.jpghttp://www.multifilla.com/images/Product_highlights/Plaster_paris.jpghttp://www.multifilla.com/images/Product_highlights/Glass_tile3.jpghttp://www.multifilla.com/images/Product_highlights/Glass_tile2.jpg
  • 7/27/2019 Buku Skrap Koleksi Gambar

    22/32

    7

    Wonder Water (tm)

    Melt to shape clear polymer pallet in conventional oven

    at 195 degree Celsius for permanent water clear or

    bubbled ice cubes, and waterfall.

    8

    Milliput Epoxy Putty

    The epoxy putty that sets rock hard within 3 hours even

    under water. patches water tanks, radiators, models,

    miniature masters, fixes ceramics adhere to plastic,

    metal, wood or glass. Mends molds, set tool handles,

    ewelry fittings, takes drilling and sanding as well.

    9

    Lining tape

    This ultra-thin white tape easily dispenses from an

    ergonomic dispenser and have many craft applications.

    As organizational chart tape it can be marker colored.

    Easily bridges hairline cracks, pinholes or mask seam

    lines. Card crafting, Parchment art and stenciling. Tape

    removable with alcohol but accepts aerosol spray paint or

    acrylics. Width: 5mm, length: 12meter.

    10

    Mini mosaics

    Attractively colored mini glass like mosaic in transparent

    and opaque colors. Fix with transparent modeling glue.

    Grout if necessary with Multifilla Multi-purpose cement

    filler. Decorate ceramic wares, compliment folk art

    painting, scrap book, card making or mosaic lamp shade.

    11

    Mold Maker

    Mold making simplified. Press soft pliable Sculpey over

    intricate detail. After baking to 130C the elasticlay mold

    is permanent and flexible. Elasticlay is also a polymer

    clay softener when kneaded with stiff clay.

    http://www.multifilla.com/images/Product_highlights/24Untitled-1.jpghttp://www.multifilla.com/images/Product_highlights/Q126.jpghttp://www.multifilla.com/images/Product_highlights/Q128.jpghttp://www.multifilla.com/images/Product_highlights/Milliput.jpghttp://www.multifilla.com/images/Product_highlights/Wonder_Water.jpghttp://www.multifilla.com/images/Product_highlights/24Untitled-1.jpghttp://www.multifilla.com/images/Product_highlights/Q126.jpghttp://www.multifilla.com/images/Product_highlights/Q128.jpghttp://www.multifilla.com/images/Product_highlights/Milliput.jpghttp://www.multifilla.com/images/Product_highlights/Wonder_Water.jpghttp://www.multifilla.com/images/Product_highlights/24Untitled-1.jpghttp://www.multifilla.com/images/Product_highlights/Q126.jpghttp://www.multifilla.com/images/Product_highlights/Q128.jpghttp://www.multifilla.com/images/Product_highlights/Milliput.jpghttp://www.multifilla.com/images/Product_highlights/Wonder_Water.jpghttp://www.multifilla.com/images/Product_highlights/24Untitled-1.jpghttp://www.multifilla.com/images/Product_highlights/Q126.jpghttp://www.multifilla.com/images/Product_highlights/Q128.jpghttp://www.multifilla.com/images/Product_highlights/Milliput.jpghttp://www.multifilla.com/images/Product_highlights/Wonder_Water.jpghttp://www.multifilla.com/images/Product_highlights/24Untitled-1.jpghttp://www.multifilla.com/images/Product_highlights/Q126.jpghttp://www.multifilla.com/images/Product_highlights/Q128.jpghttp://www.multifilla.com/images/Product_highlights/Milliput.jpghttp://www.multifilla.com/images/Product_highlights/Wonder_Water.jpg
  • 7/27/2019 Buku Skrap Koleksi Gambar

    23/32

  • 7/27/2019 Buku Skrap Koleksi Gambar

    24/32

    17

    Color Tissue Paper

    Attractive assorted 12 colors X 2 each soft card craft

    tissue paper 20" X 30" as packaging or window display

    decorations.

    18

    Cement SculptureTools

    5pcs flexible tool steel with profiles best suited for cement

    sculpture with Multifilla pre=mix mortar.

    2. SUMBER KOLEKSI

    Kesemua koleksi gambar peralatan tidak kekal di bawah merupakan antara

    bahan yang terdapat di Sekolah Kebangsaan Desa Baiduri sewaktu saya

    menjalankan Pengalaman Berasaskan Sekolah (PBS) selama seminggu di sana

    . Terdapat pelbagai jenis alatan tidak kekal yang boleh digunakan oleh para

    pelajar untuk aktiviti-aktiviti seni visual.

    Kertas Malilakat, mounting board,sugar paper dan Kertas Warna

    Kertas Lukisan

    http://www.multifilla.com/images/Product_highlights/Product_highlights2/23.jpghttp://www.multifilla.com/images/Product_highlights/03.jpghttp://www.multifilla.com/images/Product_highlights/Product_highlights2/23.jpghttp://www.multifilla.com/images/Product_highlights/03.jpghttp://www.multifilla.com/images/Product_highlights/Product_highlights2/23.jpghttp://www.multifilla.com/images/Product_highlights/03.jpghttp://www.multifilla.com/images/Product_highlights/Product_highlights2/23.jpghttp://www.multifilla.com/images/Product_highlights/03.jpg
  • 7/27/2019 Buku Skrap Koleksi Gambar

    25/32

    Pensel Warna Pelet, bullet stapler, oil pastel

    Gam UHU Poster colour

    Dakwat Lino Fabric Dye

  • 7/27/2019 Buku Skrap Koleksi Gambar

    26/32

    ThinnerSpan

    Straw Surat khabar

    Pelaka (cat mural) Palet dan berus pelbagai saiz

  • 7/27/2019 Buku Skrap Koleksi Gambar

    27/32

    1. SUMBER KOLEKSI

    Koleksi gambar di bawah merupakan gambar-gambar yang diambil semasa

    saya menjalankan PBS di Sekolah Kebangsaan Desa Baiduri pada 30hb 8

    sehingga 3hb 8 lepas. Kesemua gambar di bawah diambil di dalam bilik seni

    sekolah tersebut yang juga merupakan setor seni.

  • 7/27/2019 Buku Skrap Koleksi Gambar

    28/32

  • 7/27/2019 Buku Skrap Koleksi Gambar

    29/32

  • 7/27/2019 Buku Skrap Koleksi Gambar

    30/32

  • 7/27/2019 Buku Skrap Koleksi Gambar

    31/32

    INSTITUT PENDIDIKAN GURU MALAYSIA

    KAMPUS ILMU KHAS

    PROGRAM IJAZAH SARJANA MUDA PENDIDIKAN

    SEMESTER 2 AMB ILAN JANUARI 2010

    KERJA KURSUS BERASASKAN ILMU

    NAMA DAN NO. KADPENGENALAN

    1. NURUL NAZIHAH BINTI JAMALUDIN900707-06-5240

    2. NOR ADILLA BINTI CHE MOHAMAD901006-11-5684

    3. WAN ZULFADLI AD-DINNIE BIN WAN AZMI4. 901110-11-5481

    NO KURSUS IPGIKG012010/(PSV 142)

    KUMPULAN G 2.8

    NAMA PENSYARAH(1) PUAN ROHANE BINTI ISMAIL(2) PUAN FARIDAH ANUM BINTI ABDUL WAHID

    TARIKH HANTAR 13 SEPTEMBER 2010

    KONSEP KURIKULUM PSV DAN KONSEP SUKATAN PELAJARANPSV

  • 7/27/2019 Buku Skrap Koleksi Gambar

    32/32