1

“KNOWLEDGE TRANSFER PROGRAMME – KTP”

JABATAN PENGAJIAN TINGGI, KEMENTERIAN PENDIDIKAN MALAYSIA

LAPORAN AKHIR / FINAL REPORT Nota: Jika terdapat sebarang perubahan seperti dalam borang asal, sila pohon kelulusan dari pihak Urusetia Note: If there any changes in the original form, kindly get approval from Secretariat.

A

B

MAKLUMAT PROJEK / Details of Project

KOD RUJUKAN / TAJUK PROJEK: Reference Code / Title of Project:

I-gt/21(UNIMAP – 11)

NAMA KETUA PROJEK: Name of Project Leader:

TUNKU MUHAMMAD NIZAR BIN TUNKU MANSUR

NAMA AKADEMIA BERSAMA: Name of Co-Academia:

1. Prof Dr Syed Idris Bin Syed Hassan 2. Prof Madya Dr Mohd Fareq Bin Abdul Malek 3. Dr Rosnazri Bin Ali 4. Nor Hanisah Binti Baharudin 5. Yazhar Bin Yatim

NAMA INDUSTRI / KOMUNITI: Name of Industry / Community:

Perunding Iz’ad Sdn Bhd

NAMA SISWAZAH PELATIH: Name of Graduate Intern:

1. Farhana Binti Zainuddin 2. Nurul Razliana Binti Abdul Razak

TEMPOH MASA PROJEK: Duration of project:

TEMPOH: Duration:

2 TAHUN

DARI: From:

12 JULAI 2011

HINGGA: To:

31 JANUARI 2014

MAKLUMAT KEWANGAN (GERAN, PERBELANJAAN DAN SUMBANGAN) / Details of Financial (Grant, Expenditure and Contribution)

JUMLAH GERAN KTP YANG DILULUSKAN: Amount of Approved KTP Grant:

RM 128,000

BAKI GERAN TERAKHIR: *SILA SERTAKAN SLIP BAYARAN DARI BENDAHARI Final Balance of Grant (*Please attach payment slip from bursary):

RM 656.08

PERATUSAN BELANJA TERAKHIR: Final Percentage of Expenses:

99.5%

JUMLAH TERAKHIR SUMBANGAN KEWANGAN DARIPADA RAKAN INDUSTRI / KOMUNITI SEHINGGA KINI: Final Amount of Monetary Contribution from Industry / Community Partner up to this period:

JUMLAH TERAKHIR SUMBANGAN BUKAN KEWANGAN DARIPADA RAKAN INDUSTRI / KOMUNITI SEHINGGA KINI: Final Amount of Non-Monetary Contribution from Industry / Community Partner up to this period:

RM 1,800.00

2

C

D

E

PRESTASI PROJEK / Project Achievement

ILMU YANG BERJAYA DIPINDAHKAN: Successful Knowledge transferred:

1. Various street lightings and systems based on solar / wind hybrid system for load sizing process. 2. Electrical design process for equipment and cable sizing, system protections and standard used by the authorities. 3. Engineering management skills

PENCAPAIAN TERAKHIR MENGIKUT MILESTONE BESERTA PERATUS: Final Achievement(s) based on Milestone and Percentage:

1. Site Selection and Load Sizing (100%) 2. Design of Hybrid Power System (100%) 3. System Installation & Commissioning (100%) 4. Monitoring and data collection (50% and on going)

HASIL AKHIR KEPADA INDUSTRI / KOMUNITI SASARAN: Final Outcome(s) to Targeted Industry / Community:

1. 2. 3.

HASIL AKHIR KEPADA PEMBANGUNAN MODAL INSAN: Final Outcome(s) and Impact(s) to Human Capital Development:

1. Technical knowledge on professional process of electrical designing.

2. Technical knowledge on installation, testing and commissioning of electrical system.

PULANGAN AKHIR KEPADA IPTA: Final Return(s) to IPTA:

1. School of Electrical System Engineering could claim the professional course conducted as one of the academic activities for 2011.

2. Prototype of small hybrid power system named “UniMAP PV Power Trainer” has won Gold Medal at ITEX 2012 on May 2012.

3. Prototype of small hybrid power system named “UniMAP PV Power Trainer” has won Special Award at CEIGE 2012 at Southern Taiwan University of Technology on September 2012.

4. Prototype of small hybrid power system named “Hybrid Solar and Wind Portable Generator” has won Silver Medal at UniMAP Inventor Exhibition 2013 on January 2013.

5. A research paper titled “UniMAP PV Power System Trainer Set for Teaching and Standby Power Generator” has been accepted and presented at Seminar Hasil Penyelidikan, Kementerian Pengajian Tinggi 2013 on 2-3 July at Hotel EDC-UUM.

6. A research paper titled “Development of Hybrid PV and Wind Power System for Standalone Street Lighting” has been accepted and presented at 1st National Conference on Knowledge Transfer (KTP-01) on 21-23 August 2013 at Hotel Equatorial Bangi, Selangor.

HASIL AKHIR TIDAK LANGSUNG YANG DITERIMA OLEH INDUSTRI / KOMUNITI (SASARAN): Final Indirect Outcome(s)received by recipient Industry / Community (Targeted):

1. Technical knowledge on professional process of electrical design also beneficial to the other academic staffs who attended the course.

2. A hybrid system that could be a showcase and interesting site to visit by students and industries.

HASIL AKHIR TIDAK LANGSUNG YANG DITERIMA OLEH PIHAK KETIGA (BUKAN SASARAN): Final Indirect Outcome(s)received by third party:

1. 2. 3.

BILANGAN PENERBITAN (JIKA ADA): Number of Publication (If Any):

1. T.M.N. Tunku Mansur, N.H. Baharudin, R. Ali, A.R.N. Razliana, Z. Farhana, "UniMAP PV Power System Trainer Set for Teaching and Standby Power Generator", Seminar Hasil Penyelidikan, Kementerian Pengajian Tinggi 2013, 2-3 July 2013.

2. Tunku Muhammad Nizar Tunku Mansur, Rosnazri Ali, Nor Hanisah Baharudin, Yazhar Yatim, Farhana Zainuddin, Nurul Razliana Abd Razak, "Development of

3

F

G

Hybrid PV and Wind Power System for Standalone Street Lighting", 1st National Conference on Knowledge Transfer (KTP 01), 21–23 August 2013.

MASALAH / KEKANGAN / Problems / Constraints

ISU/MASALAH/CABARAN KETIKA MELAKSANAKAN PROGRAM: Issue/Problem/Challenge during implementation progress:

1. Selecting site location to install the system. Finally is at the UniMAP Ulu Pauh Campus. 2. Selecting the optimum design of the system based on the location available. 3. Selecting vendor and deliveries.

CADANGAN PENAMBAHBAIKAN / Recommendation

CADANGAN PENAMBAHBAIKAN: Recommendation:

AKUAN KETUA PROJEK / Declaration by Project Leader

Tandatangan Ketua Projek : _Tunku Muhammad Nizar__ Tarikh : 6 Mac 2014

Project Leader’s Signature : Date :

AKUAN TIMBALAN NAIB CANSELOR / PENGARAH YANG BERTANGGUNGJAWAB / Declaration by responsible Deputy Vice Chancellor / Director

NAMA PUSAT BERTANGGUNGJAWAB: Name of Responsible Center:

NAMA TIMBALAN CANSELOR YANG BERTANGGUNGJAWAB: Name of Responsible Deputy Vice Chancellor:

Tandatangan Ketua Projek : ___________________________ Tarikh : Project Leader’s Signature : Date :

SEBARANG PERTANYAAN/MAKLUMAT TAMBAHAN BOLEH DIAJUKAN KEPADA:

SEKRETARIAT “KNOWLEDGE TRANSFER PROGRAMME”-KTP Suite 125, Kompleks EUREKA

Universiti Sains Malaysia

(Tandatangan Elektronik) (Electronic Signature)

(Tandatangan Elektronik) (Electronic Signature)

4

11800 Pulau Pinang

Tel: 04-657 8870 Fax: 04-657 5444