Lesson Plan PTT 204/3 Sem II 2012/2013

UNIVERSITI MALAYSIA PERLIS (UniMAP) Pusat Pengajian Kejuruteraan Bioproses

COURSE OUTLINE

(1) Kod kursus/ Course code: PTT204

(2) Tajuk kursus/ Course title: Mekanik Bendalir Gunaan / Applied Fluid Mechanics

(3) Nilai unit/ Number of unit: 3

(4) Jenis kursus/ Course type: Teras/ Core

(5) Prasyarat/ Prerequisite: Tiada/Nil

(6) Sinopsis kursus/ Course synopsis:

This course emphasizes fundamental concepts and problem-solving techniques. Topics to be covered include fluid properties, static and kinematics, control volume analysis, momentum analysis of flow system, dimensional analysis, internal flows (pipe flows), differential analysis, and external flows (lift and drag).

(7) ) Hasil Pembelajaran / Learning Outcomes:

At the end of the course, students are expected to be:

1. Ability to demonstrate the essential parameters describing a fluid system and recognize the common devices used in measuring pressure and flow rates and turbo machineries.

2. Ability to calculate pressures, forces, and stability in static fluid systems and distinguish the link between conserved quantities and the equations of fluid mechanics.

3. Ability to calculate control volumes and surfaces for developing the equations of fluid mechanics.

(8) Senarai eksperimen yang mungkin/ List of possible experiments:

Exp 1 : Flow rate measurement – operation and characteristic of three different basic types of

flow meter Exp 2 : Flow measurement – using differential head

Exp 3 : Determination of loss coefficient when fluid flows through 90 degree elbow. Exp 4 : Measurement of Reynolds Number at different types of flow. Exp 5 : Measurement of Reynolds Number by the upper and lower critical velocities. Exp 6 : Measurement of hydrostatic pressure on plain surface. Exp 7 : Determination of impact of water jet using different types of vanes.

Exp 8 : Determination of fluid friction in smooth bore pipe. Exp 9 : Determination of fluid friction in roughened pipe. Exp 10 : Measurement of head loss due to pipe friction. Exp 11 : Measurement of head loss due to pipe fittings.

Lesson Plan PTT 204/3 Sem II 2012/2013

Exp 12 : Effect of pump configuration on flow rate using single vs. series pump. Exp 13 : Effect of pump configuration on flow rate using single vs. parallel pump. Exp 14 : Effect of pump configuration on flow rate using series vs. series pump.

(9) Pendekatan pembelajaran/ Learning approach:

i. Lecture : 28 hoursii. Practical : 42 hours

(10) Sumbangan penilaian/ Evaluation contribution:

(i) Peperiksaan/ Examination: 60%

Mid Term Examination = 20% Final Examination = 40%

(ii) Penilaian Berterusan/ Continual Assessment: 40%

Assignments/Quizzes = 10% Laboratories = 30%

(Kuiz boleh diberi tanpa notis)

(11) Pensyarah dan Pegawai Latihan Vokasional/Lecturers and Teaching Engineers

Lecturer PLV

Miss Nor Helya Iman Bt Kamaludin Mr. Mohd Qalani Bin Che Kassim

(12) Senarai buku teks dan rujukan/ List of text books and references : (Dahulukan dengan rujukan yang utama/ list main texts/references first)

1. Cengel, Y. A., and Cimbala, J. M. (2010). “Fluid Mechanics: Fundamental and Applications, Second Edition in SI Units”, McGraw-Hill.

2. Mott, R.L. (2006). “Applied Fluid Mechanics”, 6th Edition, Prentice Hall.3. Crowe, C.T., Elger, D.F., and Robertson, J.A. (2005). “Engineering Fluid Mechanics”, John Wiley,

8th Edition.4. Gatignol, R., and Prud'Homme,R. (2001). “Mechanic and Thermodynamic Modeling of Fluid

Interfaces”, World Scientific Publishing Company.5. Levi, M. (2009). “The Mathematical Mechanic: Using Physical Reasoning to Solve Problems”,

Princeton University Press.

RANCANGAN MENGAJAR/LESSON PLAN

Lesson Plan PTT 204/3 Sem II 2012/2013Minggu/Week

Kandungan Kursus / Course Contents(Panduan/Guidelines)

Pensyarah/Lecturer

Lesson Plan PTT 204/3 Sem II 2012/2013

1 (18 Feb-24 Feb)

Introduction to fluid mechanics Basic concepts of fluid and their applications, no-slip condition, and classification of fluid flows.

(2 Hours)Miss Nor Helya Iman

Week 1:Introduction to fluid mechanics laboratory safety and its machineries.

(3 Hours)

Miss Nor Helya Iman Mr Mohd Qalani

2(25 Feb-03 Mar)

Properties of fluidsDensity, viscosity, vapor pressure and surface tension.

(2 Hours)Miss Nor Helya Iman

Week 2:Exp 1&3 (Group 1)Exp 12&13 (Group 2)Exp 8&9 (Group 3)Exp 5 (Group 4)Exp 11 (Group 6)

(3 Hours)

Miss Nor Helya Iman Mr Mohd Qalani

3(04 Mar-10 Mar)

Pressure and Fluid staticManometry and barometry, hydrostatic forces on submerged surface, buoyancy and stability, fluids in rigid body motion.

(2 Hours)

Miss Nor Helya Iman

Week 3:Exp 2 (Group 1)Exp 14 (Group 2)Exp 10 (Group 3)Exp 6 (Group 4)Exp 1&3 (Group 5)Exp 12&13 (Group 6)

(3 Hours)

Miss Nor Helya Iman Mr Mohd Qalani

4-5(11 Mar-24 Mar)

Fluid kinematicsLagrangian and Eulerian descriptions, flow visualization, vorticity and rotationality, and Reynolds transport theorem.

(4 Hours)

Miss Nor Helya Iman

Week 4:Exp 4 (Group 1)Exp 11 (Group 3)Exp 7 (Group 4)Exp 2 (Group 5)Exp 14 (Group 6)

(3 Hours)

Miss Nor Helya Iman Mr Mohd Qalani

Week 5:Exp 5 (Group 1)Exp 1&3 (Group 2)Exp 12&13 (Group 3)Exp 8&9 (Group 4)Exp 4 (Group 5)

(3 Hours)

Miss Nor Helya Iman Mr Mohd Qalani

6-7(25 Mar-07 Apr)

Mass, Bernoulli and energy equations Mass, momentum and energy equations, control volumes, Bernoulli approximation.

(4 Hours)Miss Nor Helya Iman

Week 6:Exp 6 (Group 1)Exp 2 (Group 2)Exp 14 (Group 3)Exp 10 (Group 4)Exp 5 (Group 5)Exp 1&3 (Group 6)

(3 Hours)

Miss Nor Helya Iman Mr Mohd Qalani

Lesson Plan PTT 204/3 Sem II 2012/2013Week 7:Exp 7 (Group 1)Exp 4 (Group 2)Exp 11 (Group 4)Exp 6 (Group 5)Exp 2 (Group 6)

(3 Hours)

Miss Nor Helya Iman Mr Mohd Qalani

8(08 Apr-14 Apr)

CUTI PERTENGAHAN SEMESTER / MID-TERM BREAK

9-10(15 Apr-28 Apr)

Momentum analysis of flow systemsNewton’s law, conservation of momentum, linear momentum equation, angular momentum equation.

(4 Hours)Miss Nor Helya Iman

Week 9:Exp 8&9 (Group 1)Exp 5 (Group 2)Exp 1&3 (Group 3)Exp 12&13 (Group 4)Exp 7 (Group 5)Exp 4 (Group 6)

(3 Hours)

Miss Nor Helya Iman Mr Mohd Qalani

Week 10:Exp 10 (Group 1)Exp 6 (Group 2)Exp 2 (Group 3)Exp 14 (Group 4)Exp 8&9 (Group 5)Exp 5 (Group 6)

(3 Hours)

Miss Nor Helya Iman Mr Mohd Qalani

11(29 Apr-05 May)

Dimensional analysis and modeling Dimensional homogeneity, dimensional analysis, experimental testind and similarity. (2 Hours)

Miss Nor Helya Iman

Week 11:Exp 11 (Group 1)Exp 7 (Group 2)Exp 4 (Group 3)Exp 10 (Group 5)Exp 6 (Group 6)

(3 Hours)

Miss Nor Helya Iman Mr Mohd Qalani

12-13(06 May-19 May)

Flow in pipesLaminar and turbulent flows, major and minor losses, piping networks, pump selection, flow rate and velocity measurement instruments.

(4 Hours)

Miss Nor Helya Iman

Week 12:Exp 12&13 (Group 1)Exp 8&9 (Group 2)Exp 5 (Group 3)Exp 1&3 (Group 4)Exp 11 (Group 5)Exp 7 (Group 6)

(3 Hours)

Miss Nor Helya Iman Mr Mohd Qalani

Week 13:Exp 14 (Group 1)Exp 10 (Group 2)Exp 6 (Group 3)Exp 2 (Group 4)Exp 12&13 (Group 5)Exp 8&9 (Group 6)

(3 Hours)

Miss Nor Helya Iman Mr Mohd Qalani

14(20 May-

Differential analysis of fluid flowStream function, continuity, Navier-Stokes equation.

Miss Nor Helya Iman

Lesson Plan PTT 204/3 Sem II 2012/2013

26 May)

(2 Hours)Week 14:Exp 11 (Group 2)Exp 7 (Group 3)Exp 4 (Group 4)Exp 14 (Group 5)Exp 10 (Group 6)

(3 Hours)

Miss Nor Helya Iman Mr Mohd Qalani

15(27 May-02 June)

Drag, lift (external flows) and compressible flow Drag and lift, friction and pressure drag, one dimensional isentropic flow, classification of open-channel flows.

(2 Hours)Miss Nor Helya Iman

Week 15:Laboratory Test

(3 Hours)Miss Nor Helya Iman Mr Mohd Qalani

16(03 June-09 June)

MINGGU ULANGKAJI / REVISION WEEK

17-18(10 June-23 June)

PEPERIKSAAN AKHIR SEMESTER / FINAL EXAMINATION

RANCANGAN MAKMAL & TUTORIAL / LABORATORY PLAN & TUTORIAL

Nota Penting: Kehadiran pelajar ke kuliah/tutorial/makmal adalah WAJIB. Jika tidak hadir tanpa sebab, pelajar boleh dihalang daripada menduduki peperiksaan akhir.

Week / DateG1 G2 G3 G4 G5 G6

1(18/02)

Introduction to Laboratory

2(25/02) 1&3 12&13 8&9 5 11

3(04/03) 2 14 10 6 1&3 12&13

4(11/03) 4 11 7 2 14

5(18/03) 5 1&3 12&13 8&9 4

6(25/03) 6 2 14 10 5 1&3

7(01/04) 7 4 11 6 2

8(08/04)

Mid Sem Break

9(15/04) 8&9 5 1&3 12&13 7 4

10(22/04) 10 6 2 14 8&9 5

11(29/04) 11 7 4 10 6

12(06/05) 12&13 8&9 5 1&3 11 7

13(13/05) 14 10 6 2 12&13 8&9

14(20/05) 11 7 4 14 10

15(27/05)

Lab Test

16(03/06)

Study Week

Lesson Plan PTT 204/3 Sem II 2012/2013

KUMPULAN MAKMAL/ LAB GROUPS

Group

Group: 1AHMAD KHAIRUL ANUAR BIN RAMLI

AIMI SHAZWANI BINTI SHARIFFUDDINAMINAH BINTI IDERIS

ASMALAILI BINTI SALEHUDIN

Group: 2AZZAHRA BINTI ARIPIN

ENIS NATASHA NOOR BINTI ARBAAINFATEN SYAMIMI BINTI KAMYIS

FATIN IZZATI BINTI MOHMED AZMI

Group: 3KUEK SZE TENGLAU SIN MUN

MEOR AZEEM BIN MEOR AZLINOOR SAFIRA AINA BINTI ARSHAD

Group: 4NOR AMIRRA BINTI ABU NAYANNOR SYAZWANI BINTI AZMANNORAINON MAULAD NASHIRNUR AZREEN BINTI ARIFFIN

NUR FARAHIN BINTI ROSTAM

Group: 5NUR SYAZANA BINTI JALANI

NURSYAFIQAH ATHIRAH BINTI MOHAMAD ZABIDINURUL SAKINAH BINTI MOHD NORSITI FARAHAIN BINTI ABD RAHMAN

SITI MARIAM BINTI MAZALAN

Group: 6SITI NORAFFIYAH BINTI MONSHI

SITI NURULNASYRA ATHIRA BINTI AZMANTAN CHAI YUN

WAN ASMA SALSABILA BINTI WAN MOHD NORZAFRYL ZAHEIDY BIN MUSTOFA