MONITORING TEMPERATURE RUANGAN DENGAN DISPLAY LCD

DAN RECORDING

Dosen Pembimbing Drs. Ismail Wellid, MT

GROUP : 7KETUA : Moch. Rezki Selamet (131611047)ANGGOTA : Mukhammad Imam Nugroho (131411049)

Siti Haryani (131611056) Yuda Wardiana (131611061)

KELAS : 2B

PROGRAM STUDI TEKNIK PENDINGIN DAN TATA UDARA JURUSAN TEKNIK REFRIGERASI DAN TATA UDARA

POLITEKNIK NEGERI BANDUNG

LATAR BELAKANGDalam suatu pengukuran temperature kita biasanya menunggu guna memperoleh data tiap menit.

Tetapi kadang kala kita selalu meniggalkan pengukuran karena ada kegiatan lain yang sama penting. Karna itu alat ini dibuat untuk menyimpan data temperature supaya data pengukuran tersimpan walaupun kita tinggalkan. Data temperature tersebut tidak akan hilang karena tersimpan oleh micro sd.

Pengukuran temperature menggunakan lm35, lm35 berfungsi sebagai sensor yang akan mengkonversi suhu menjadi tegangan dan dikirim ke arduino. Arduino tidak begitu saja bias menerima tegangan yang di hasilkan oleh lm35 tetapi harus dikonversi ADC, supaya bias di konversi dan data yang di hasilkan tepat atau sesuai dengan suhu ruangan. Arduino adalah akat yang penting di projeck ini karena arduino memprogram seluruh sensor yang ada.

TUJUAN Dapat mengetahui suhu ruangan yang terukur

Dapat menyimpan data temperature

Dapat mengetahui perubahan suhu ruangan

Dapat menganalisis data yang tersimpan guna keperluaan akademik

DESKRIPSI ALATAlat ini mempunyai 4 buah sensor LM35 yang ditempatkan pada tiap sudut ruangan ditampilkan

pada display LCD dan di record oleh arduino uno. Penyimpanan data dengan micro sd module shield dan di simpan oleh memori micro sd menit permenit temperaturenya dengan mencamyumkan tanggal bulan dan tahun pengukuran. Data yang disimpan oleh micro sd module berbentuk .txt(notepad).

Alat ini hanya memonitoring tidak bisa mengkontrol kerja alat lain. Walaupun hanya memonitoring tetapi alat ini bisa digunakan untuk keperluan analisis system kerja dari kompresi uap atau mesin pendingin lainnya, atau juga bisa melihat perubahan tiap menit dari ruangan yang dikondisikan.

2

ALAT DAN BAHANARDUINO

Arduino UNO adalah

sebuah board mikrokontroler

yang didasarkan pada

ATmega328 (datasheet).

Arduino UNO mempunyai 14

pin digital input/output (6 di

antaranya dapat digunakan

sebagai output PWM), 6 input analog, sebuah osilator Kristal 16 MHz, sebuah

koneksi USB, sebuah power

jack, sebuah ICSP header, dan sebuat tombol reset.

Arduino UNO merupakan salah satu contoh dari Arduino USB. Arduino USB

menggunakan USB sebagai interface pemrograman atau komunikasi komputer. Arduino UNO

memuat semua yang dibutuhkan untuk menunjang mikrokontroler, mudah menghubungkannya

ke sebuah computer dengan sebuah kabel USB atau mensuplainya dengan sebuah adaptor AC ke

DC atau menggunakan baterai untuk memulainya. Arduino tidak hanya sekedar sebuah alat

pengembangan, tetapi ia adalah kombinasi dari hardware, bahasa pemrograman dan Integrated

Development Environment (IDE) yang canggih.

IDE adalah sebuah software yang sangat berperan untuk menulis program, meng-compile menjadi kode biner dan meng-upload ke dalam memory microcontroller. Ada banyak projek dan alat-alat dikembangkan oleh akademisi dan profesional dengan menggunakan Arduino, selain itu juga ada banyak modul-modul pendukung (sensor, tampilan, penggerak dan sebagainya) yang dibuat oleh pihak lain untuk bisa disambungkan dengan Arduino. Arduino berevolusi menjadi sebuah platform karena ia menjadi pilihan dan acuan bagi banyak praktisi.

3

LM35

LM35 Temperature Sensor is one type of sensor that converts electrical quantities to the temperature scale in the form of voltage. LM35 has 3 pieces pin legs, pin to INPUT positive voltage (+), pin OUTPUT, INPUT pin negative voltage / GND (-).

HOW the LM 35 measure???

Can operate at a voltage of 4 volts to 30 volts. Each temperature of 1 degree Celsius will show a voltage of 10 mV.

equation:

Vout = 10 mV / 1ºC

That is, if the read voltage Vout = 500 mV, then the temperature = 500mv / 10mV = 50ºC.

4

MICRO SD SHIELD

The module (MicroSD Card Adapter) is a Micro  SD card reader module, and the SPI interface via the file system driver,  microcontroller system to complete the Micro SD card read and write files.  Users can directly use the Arduino IDE comes with an SD card to complete  the library card initialization and read-write

Features:

5

Support Micro SD Card, Micro SDHC card  (high-speed card) The level conversion circuit board that can  interface level is 5V or 3.3V Power supply is 4.5V ~ 5.5V, 3.3V voltage  regulator circuit board Communication interface is a standard SPI  interface 4 M2 screw positioning holes for easy  installation Control Interface: A total of six pins (GND,  VCC, MISO, MOSI, SCK, CS), GND to

ground, VCC is the power supply, MISO, MOSI,  SCK is the SPI bus, CS is the chip select signal pin;

3.3V regulator circuit: LDO regulator output  3.3V as level converter chip, Micro SD card supply

Level conversion circuit: Micro SD card into  the direction of signals into 3.3V, MicroSD card toward the direction of the  control interface MISO signal is also converted to 3.3V, general AVR  microcontroller system can read the signal

Micro SD card connector: yes since the bomb  deck for easy card insertion and removal Positioning holes: 4 M2 screws positioning  hole diameter of 2.2mm, the module is easy to

install positioning, to achieve  inter-module combination

Mirco SD Card Interface Module :(the last picture show) -Control Interface : A total of six pins (GND,  VCC, MISO, MOSI, SCK, CS), GND to

ground , VCC is the power supply , MISO, MOSI,  SCK is SPI bus , CS is the chip select signal pin

3.3V voltage regulator circuit : LDO regulator  output is 3.3V level converter chip , Micro SD card supply

Level conversion circuit : Micro SD card into  the direction of the signal is converted to 3.3V, MicroSD card interfaces to  control the direction of the MISO signal is also converted into 3.3V, general  AVR microcontroller system can read the signal ;

Micro SD card connector : a self- bomb deck ,  easy card insertion . Positioning holes : 4 M2 screws positioning  hole diameter is 2.2mm, the positioning of the

module is easy to install , to  achieve inter- module combination ;

LCD AND BACKPACK

This is another great LCD display compatible with I2C bus and  Gadgeteer modules. With limited pin resources, your project will quicly run out of resources using normal LCDs. With this I2C interface LCD module, you only need 2 lines (I2C)to display the information.If you already have I2C devices in your

6

project, this LCD module actually cost no more resources at all. The adress can be set from 0x20-0x27.Fantastic for Arduino or gadgeteer based projects.

RTC DS1302

A Real Time Clock Module with battery backup using the easy to use DS1302 chip. The DS1302 chip uses a simple serial interface (see datasheet) and example code is available for Arduino, Raspberry Pi and many others.

7

GAMBAR KERJA/ SKEMA DAN GAMBAR TEKNIK

8

9

LANGKAH MERANGKAI1. Siapkan alat dan bahan termasuk wadah misting

2. Wadah misting lubangi untuk keperluan shield micro sd dan arduino

3. Buat jalur rangkaian pcb untuk pembagian tegangan dan konektor pin arduino

4. Rangkai seperti gambar diatas.

5. Setelah selesai membuat mekanikal langkah selanjutnya membuat program

6. Cari program LM35,Shield sd card, RTC,dan LCD

7. Setelah menemukan gabungkan program tersebut dalam satu program.

8. Compile program bila berhasil upload ke arduino

LANGKAH PENGUJIAN DAN DATA PENGUJIAN1. Hubungkan arduino pada pc2. Upload program3. Setelah itu kita bias melihat temperature sekarang dan setelah berapa jam kita juga bias melihat

temperature dibelakangnya karena telah di simpan di micro sd card

Script program arduino

#include <Wire.h>#include <LiquidCrystal_I2C.h>#include <SD.h>#include <DS1302.h>

File myFile;

LiquidCrystal_I2C lcd(0x27, 16,2);

float tempc;float tempc1;float tempc2;float tempc3;

10

int tempin = 0;int tempin1 = 1;int tempin2= 2;int tempin3 = 3;int a=1;int b;DS1302 rtc(2, 3, 5);

void setup(){ lcd.begin(); Serial.begin(9600); while (!Serial) { }

Serial.print("Initializing SD card..."); pinMode(10, OUTPUT); if (!SD.begin(4)) { Serial.println("initialization failed!"); return; } rtc.halt(false); rtc.writeProtect(false); }

void loop(){ tempc= analogRead(tempin); tempc= (5*tempc*100)/1024; tempc1= analogRead(tempin1); tempc1= (5*tempc1*100)/1024; tempc2= analogRead(tempin2); tempc2= (5*tempc2*100)/1024; tempc3= analogRead(tempin3); tempc3= (5*tempc3*100)/1024;

11

b=a++;

lcd.backlight(); lcd.setCursor(0,0); lcd.print(b);

lcd.setCursor(3,0); lcd.print(tempc,1);

lcd.setCursor(10,0); lcd.print(tempc1,1);

lcd.setCursor(3,1); lcd.print(tempc2,1);

lcd.setCursor(10,1); lcd.print(tempc3,1);

Serial.println("initialization done."); myFile = SD.open("T1A1.txt", FILE_WRITE); if (myFile) { Serial.print("Writing to T1A1.txt..."); myFile.println(rtc.getDOWStr()); myFile.println(" "); myFile.println(rtc.getDateStr()); myFile.println(" -- ");

12

myFile.println(rtc.getTimeStr()); myFile.println("T('C)= "); myFile.println(tempc); myFile.print("T1 ('C)= "); myFile.println(tempc1); myFile.print("T2 ('C)= "); myFile.println(tempc2); myFile.print("T3 ('C)= "); myFile.println(tempc3); myFile.println("---------------------------------------------------"); myFile.close(); Serial.println("done."); } else { Serial.println("error opening T1A1.txt"); } myFile = SD.open("T1A1.txt"); if (myFile) { Serial.println("T1A1.txt:"); while (myFile.available()) { Serial.write(myFile.read()); } myFile.close(); } else { Serial.println("error opening T1A1.txt"); } delay(6000); }

Data pengujian yang telah kami lakukan bisa dilihat di lampiran

13

PENUTUP KESIMPULAN DAN SARAN1. Data temperature lm35 yang terbaca oleh arduino harus di ubah ke ADC supaya bisa terukur

tegangan oleh arduino.

2. Data yang tersimpan oleh shield micro sd berupa txt(notepad)

3. Backpack yang terpasang pada lcd berguna untuk memperkecil pin pada lcd

4. Module RTC berguna untuk mengatur waktu pada penyimpanan data

Untuk mempermudah sambungan pin dan untuk menempel dengan benar seharusnya dipasang terminal untuk memperkuat sambungan

14

LAMPIRANArduino

Catu daya : 7VDC - 12VVDC Berbasis mikrokontroler/mikroprosesor : ATmega328 Jumlah port I/O : 14 pin I/O (6 pin untuk output PWM) Port antarmuka : UART TTL, I2C, SPI dan USB (Virtual Com) Bootloader : Internal Port pemograman : USB

Shield Micro SD

Support Micro SD Card, Micro SDHC card  (high-speed card) The level conversion circuit board that can  interface level is 5V or 3.3V Power supply is 4.5V ~ 5.5V, 3.3V voltage  regulator circuit board Communication interface is a standard SPI  interface 4 M2 screw positioning holes for easy  installation Control Interface: A total of six pins (GND,  VCC, MISO, MOSI, SCK, CS), GND to

ground, VCC is the power supply, MISO, MOSI,  SCK is the SPI bus, CS is the chip select signal pin;

3.3V regulator circuit: LDO regulator output  3.3V as level converter chip, Micro SD card supply

Level conversion circuit: Micro SD card into  the direction of signals into 3.3V, MicroSD card toward the direction of the  control interface MISO signal is also converted to 3.3V, general AVR  microcontroller system can read the signal

Micro SD card connector: yes since the bomb  deck for easy card insertion and removal

Positioning holes: 4 M2 screws positioning  hole diameter of 2.2mm, the module is easy to install positioning, to achieve  inter-module combination

Mirco SD Card Interface Module :(the last picture show) -Control Interface : A total of six pins (GND,  VCC, MISO, MOSI, SCK, CS), GND

to ground , VCC is the power supply , MISO, MOSI,  SCK is SPI bus , CS is the chip select signal pin

3.3V voltage regulator circuit : LDO regulator  output is 3.3V level converter chip , Micro SD card supply

Level conversion circuit : Micro SD card into  the direction of the signal is converted to 3.3V, MicroSD card interfaces to  control the direction of the MISO signal is also converted into 3.3V, general  AVR microcontroller system can read the signal ;

Micro SD card connector : a self- bomb deck ,  easy card insertion . Positioning holes : 4 M2 screws positioning  hole diameter is 2.2mm, the positioning

of the module is easy to install , to  achieve inter- module combination ;

15

LCD +BACKPACK

Specifications LCD

Supply voltage: 5V I2C Address:0x20-0x27(0x20 default) Back lit (Blue with white char color) Interface:I2C/TWI x1,Gadgeteer interface x2 Adjustable contrast Size:82x35x18 mm

Specifications Bacpack PCF8574

Compatible With Most Microcontrollers Low Standby-Current Consumption10 mA Max Latched Outputs With High-Current Drive I2C to Parallel-Port Expander Capability for Directly Driving LEDs Open-Drain Interrupt Output Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II

RTC

Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year with Leap-Year Compensation Valid Up to 2100

Serial I/O for Minimum Pin Count 2.0V to 5.5V Full Operation Uses Less than 300nA at 2.0V Single-Byte or Multiple-Byte (Burst Mode) Data Transfer for Read or Write of Clock

or RAM Data Board Size: 44mm x 24mm

Gambar Rangkaian

16

Rincian Biaya

NoAlat dan Bahan Harga

1Shield micro SD 85000

2LM35 (4 buah) 60000

2RTC 25000

3LCD + Backpack 75000

4kabel male-female 20000

5header pin 20000

6timah +lotfet 20000

7Pilok 18500

Total323500

Data Pengujian selama 2 jam

17

Wednesday

14.01.2015

--

07:21:03

T('C)=

23.93

T1 ('C)= 23.93

T2 ('C)= 24.41

T3 ('C)= 24.90

---------------------------------------------------

Wednesday

14.01.2015

--

07:21:07

T('C)=

23.93

T1 ('C)= 23.93

T2 ('C)= 24.90

T3 ('C)= 24.41

---------------------------------------------------

Wednesday

14.01.2015

--

07:22:08

T('C)=

23.44

T1 ('C)= 23.44

T2 ('C)= 23.93

T3 ('C)= 24.41

---------------------------------------------------

Wednesday

14.01.2015

--

07:23:10

T('C)=

23.44

T1 ('C)= 23.93

T2 ('C)= 23.93

T3 ('C)= 24.41

---------------------------------------------------

Wednesday

14.01.2015

--

07:24:12

T('C)=

23.44

T1 ('C)= 23.93

T2 ('C)= 23.93

T3 ('C)= 24.90

18

---------------------------------------------------

Wednesday

14.01.2015

--

07:25:13

T('C)=

23.93

T1 ('C)= 23.93

T2 ('C)= 23.93

T3 ('C)= 24.90

---------------------------------------------------

Wednesday

14.01.2015

--

07:26:15

T('C)=

23.44

T1 ('C)= 23.93

T2 ('C)= 23.93

T3 ('C)= 24.90

---------------------------------------------------

Wednesday

14.01.2015

--

07:27:18

T('C)=

23.44

T1 ('C)= 23.93

T2 ('C)= 24.41

T3 ('C)= 24.90

---------------------------------------------------

Wednesday

14.01.2015

--

07:28:20

T('C)=

23.44

T1 ('C)= 23.93

T2 ('C)= 23.93

T3 ('C)= 24.90

---------------------------------------------------

Wednesday

14.01.2015

--

07:29:23

T('C)=

23.93

T1 ('C)= 23.93

T2 ('C)= 24.41

T3 ('C)= 24.90

---------------------------------------------------

19

Wednesday

14.01.2015

--

07:30:25

T('C)=

23.93

T1 ('C)= 23.93

T2 ('C)= 24.41

T3 ('C)= 24.90

---------------------------------------------------

Wednesday

14.01.2015

--

07:31:28

T('C)=

23.93

T1 ('C)= 24.41

T2 ('C)= 24.41

T3 ('C)= 24.90

---------------------------------------------------

Wednesday

14.01.2015

--

07:32:31

T('C)=

23.93

T1 ('C)= 24.41

T2 ('C)= 24.41

T3 ('C)= 24.90

---------------------------------------------------

Wednesday

14.01.2015

--

07:33:34

T('C)=

23.93

T1 ('C)= 24.41

T2 ('C)= 24.41

T3 ('C)= 24.90

---------------------------------------------------

Wednesday

14.01.2015

--

07:34:38

T('C)=

23.93

T1 ('C)= 23.93

T2 ('C)= 24.41

T3 ('C)= 24.90

---------------------------------------------------

Wednesday

20

14.01.2015

--

07:35:40

T('C)=

23.93

T1 ('C)= 23.93

T2 ('C)= 24.41

T3 ('C)= 24.90

---------------------------------------------------

Wednesday

14.01.2015

--

07:36:44

T('C)=

23.93

T1 ('C)= 23.93

T2 ('C)= 24.41

T3 ('C)= 24.90

---------------------------------------------------

Wednesday

14.01.2015

--

07:37:48

T('C)=

23.93

T1 ('C)= 23.93

T2 ('C)= 24.41

T3 ('C)= 24.90

---------------------------------------------------

Wednesday

14.01.2015

--

07:38:52

T('C)=

24.41

T1 ('C)= 24.90

T2 ('C)= 24.90

T3 ('C)= 25.39

---------------------------------------------------

Wednesday

14.01.2015

--

07:39:56

T('C)=

24.41

T1 ('C)= 24.41

T2 ('C)= 24.90

T3 ('C)= 25.39

---------------------------------------------------

Wednesday

21

14.01.2015

--

07:41:02

T('C)=

23.93

T1 ('C)= 24.41

T2 ('C)= 24.41

T3 ('C)= 24.90

---------------------------------------------------

Wednesday

14.01.2015

--

07:42:06

T('C)=

23.93

T1 ('C)= 24.41

T2 ('C)= 24.90

T3 ('C)= 25.39

---------------------------------------------------

Wednesday

14.01.2015

--

07:43:10

T('C)=

24.41

T1 ('C)= 24.41

T2 ('C)= 24.41

T3 ('C)= 25.39

---------------------------------------------------

Wednesday

14.01.2015

--

07:44:16

T('C)=

24.41

T1 ('C)= 24.41

T2 ('C)= 24.90

T3 ('C)= 25.39

---------------------------------------------------

Wednesday

14.01.2015

--

07:45:20

T('C)=

24.41

T1 ('C)= 24.41

T2 ('C)= 24.90

T3 ('C)= 25.39

---------------------------------------------------

Wednesday

14.01.2015

22

--

07:46:26

T('C)=

24.41

T1 ('C)= 24.41

T2 ('C)= 24.90

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

07:47:32

T('C)=

24.90

T1 ('C)= 24.90

T2 ('C)= 24.90

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

07:48:38

T('C)=

24.41

T1 ('C)= 24.90

T2 ('C)= 24.90

T3 ('C)= 25.39

---------------------------------------------------

Wednesday

14.01.2015

--

07:49:44

T('C)=

24.41

T1 ('C)= 24.90

T2 ('C)= 24.90

T3 ('C)= 25.39

---------------------------------------------------

Wednesday

14.01.2015

--

07:50:50

T('C)=

24.41

T1 ('C)= 24.90

T2 ('C)= 24.90

T3 ('C)= 25.39

---------------------------------------------------

Wednesday

14.01.2015

--

23

07:51:56

T('C)=

24.41

T1 ('C)= 24.90

T2 ('C)= 24.90

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

07:53:02

T('C)=

24.41

T1 ('C)= 24.90

T2 ('C)= 25.39

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

07:54:08

T('C)=

24.41

T1 ('C)= 24.90

T2 ('C)= 24.90

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

07:55:14

T('C)=

24.41

T1 ('C)= 24.90

T2 ('C)= 24.90

T3 ('C)= 25.39

---------------------------------------------------

Wednesday

14.01.2015

--

07:56:22

T('C)=

24.41

T1 ('C)= 24.90

T2 ('C)= 24.90

T3 ('C)= 25.39

---------------------------------------------------

Wednesday

14.01.2015

--

07:57:28

24

T('C)=

24.41

T1 ('C)= 24.90

T2 ('C)= 25.39

T3 ('C)= 25.39

---------------------------------------------------

Wednesday

14.01.2015

--

07:58:36

T('C)=

24.90

T1 ('C)= 24.90

T2 ('C)= 25.39

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

07:59:42

T('C)=

24.41

T1 ('C)= 24.90

T2 ('C)= 25.39

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:00:50

T('C)=

24.90

T1 ('C)= 24.90

T2 ('C)= 25.39

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:01:58

T('C)=

24.41

T1 ('C)= 24.90

T2 ('C)= 25.39

T3 ('C)= 25.39

---------------------------------------------------

Wednesday

14.01.2015

--

08:03:06

T('C)=

25

24.41

T1 ('C)= 24.90

T2 ('C)= 24.90

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:04:14

T('C)=

24.41

T1 ('C)= 24.90

T2 ('C)= 25.39

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:05:22

T('C)=

24.90

T1 ('C)= 25.39

T2 ('C)= 25.39

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:06:30

T('C)=

24.90

T1 ('C)= 24.90

T2 ('C)= 25.39

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:07:38

T('C)=

24.90

T1 ('C)= 24.90

T2 ('C)= 25.39

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:08:48

T('C)=

24.90

26

T1 ('C)= 25.39

T2 ('C)= 25.39

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:09:56

T('C)=

24.90

T1 ('C)= 24.90

T2 ('C)= 25.88

T3 ('C)= 25.39

---------------------------------------------------

Wednesday

14.01.2015

--

08:11:06

T('C)=

24.41

T1 ('C)= 24.90

T2 ('C)= 25.39

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:12:14

T('C)=

24.90

T1 ('C)= 25.39

T2 ('C)= 25.39

T3 ('C)= 25.39

---------------------------------------------------

Wednesday

14.01.2015

--

08:13:24

T('C)=

24.41

T1 ('C)= 24.90

T2 ('C)= 25.39

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:14:34

T('C)=

25.39

T1 ('C)= 24.90

27

T2 ('C)= 25.88

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:15:42

T('C)=

24.90

T1 ('C)= 25.39

T2 ('C)= 25.88

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:16:52

T('C)=

24.90

T1 ('C)= 24.90

T2 ('C)= 25.39

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:18:02

T('C)=

24.90

T1 ('C)= 25.39

T2 ('C)= 25.88

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:19:12

T('C)=

24.90

T1 ('C)= 25.39

T2 ('C)= 25.88

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:20:24

T('C)=

25.39

T1 ('C)= 24.90

T2 ('C)= 25.88

28

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:21:34

T('C)=

24.90

T1 ('C)= 25.39

T2 ('C)= 25.88

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:22:44

T('C)=

24.90

T1 ('C)= 25.39

T2 ('C)= 25.39

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:23:56

T('C)=

24.90

T1 ('C)= 24.90

T2 ('C)= 25.39

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:25:06

T('C)=

24.90

T1 ('C)= 24.90

T2 ('C)= 25.39

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:26:18

T('C)=

24.90

T1 ('C)= 24.90

T2 ('C)= 25.39

T3 ('C)= 25.88

29

---------------------------------------------------

Wednesday

14.01.2015

--

08:27:28

T('C)=

24.90

T1 ('C)= 24.90

T2 ('C)= 25.88

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:28:40

T('C)=

24.90

T1 ('C)= 24.90

T2 ('C)= 25.39

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:29:52

T('C)=

24.90

T1 ('C)= 25.39

T2 ('C)= 25.88

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:31:04

T('C)=

24.90

T1 ('C)= 25.39

T2 ('C)= 25.88

T3 ('C)= 26.37

---------------------------------------------------

Wednesday

14.01.2015

--

08:32:16

T('C)=

24.90

T1 ('C)= 25.39

T2 ('C)= 25.88

T3 ('C)= 25.88

---------------------------------------------------

30

Wednesday

14.01.2015

--

08:33:28

T('C)=

25.39

T1 ('C)= 25.39

T2 ('C)= 25.88

T3 ('C)= 26.86

---------------------------------------------------

Wednesday

14.01.2015

--

08:34:40

T('C)=

25.39

T1 ('C)= 25.39

T2 ('C)= 25.88

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:35:54

T('C)=

24.90

T1 ('C)= 25.39

T2 ('C)= 25.88

T3 ('C)= 26.37

---------------------------------------------------

Wednesday

14.01.2015

--

08:37:06

T('C)=

24.90

T1 ('C)= 25.39

T2 ('C)= 25.88

T3 ('C)= 26.37

---------------------------------------------------

Wednesday

14.01.2015

--

08:38:20

T('C)=

25.39

T1 ('C)= 25.39

T2 ('C)= 25.88

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

31

14.01.2015

--

08:39:32

T('C)=

24.90

T1 ('C)= 24.90

T2 ('C)= 25.88

T3 ('C)= 25.88

---------------------------------------------------

Wednesday

14.01.2015

--

08:40:46

T('C)=

24.90

T1 ('C)= 25.39

T2 ('C)= 25.88

T3 ('C)= 26.37

---------------------------------------------------

Wednesday

14.01.2015

--

08:41:58

T('C)=

25.39

T1 ('C)= 25.39

T2 ('C)= 25.88

T3 ('C)= 26.86

---------------------------------------------------

Wednesday

14.01.2015

--

08:43:12

T('C)=

25.39

T1 ('C)= 25.88

T2 ('C)= 26.37

T3 ('C)= 26.37

---------------------------------------------------

Wednesday

14.01.2015

--

08:44:26

T('C)=

25.39

T1 ('C)= 25.88

T2 ('C)= 26.37

T3 ('C)= 26.37

---------------------------------------------------

Wednesday

32

14.01.2015

--

08:45:40

T('C)=

25.88

T1 ('C)= 25.88

T2 ('C)= 26.37

T3 ('C)= 26.37

---------------------------------------------------

Wednesday

14.01.2015

--

08:46:54

T('C)=

25.39

T1 ('C)= 25.88

T2 ('C)= 26.37

T3 ('C)= 26.86

---------------------------------------------------

Wednesday

14.01.2015

--

08:48:08

T('C)=

25.88

T1 ('C)= 25.88

T2 ('C)= 26.37

T3 ('C)= 26.86

---------------------------------------------------

Wednesday

14.01.2015

--

08:49:22

T('C)=

25.88

T1 ('C)= 25.88

T2 ('C)= 26.37

T3 ('C)= 26.37

---------------------------------------------------

Wednesday

14.01.2015

--

08:50:38

T('C)=

25.88

T1 ('C)= 25.88

T2 ('C)= 26.37

T3 ('C)= 26.37

---------------------------------------------------

Wednesday

14.01.2015

33

--

08:51:52

T('C)=

25.39

T1 ('C)= 25.39

T2 ('C)= 25.88

T3 ('C)= 26.37

---------------------------------------------------

Wednesday

14.01.2015

--

08:53:06

T('C)=

25.39

T1 ('C)= 25.88

T2 ('C)= 26.37

T3 ('C)= 26.37

---------------------------------------------------

Wednesday

14.01.2015

--

08:54:22

T('C)=

25.39

T1 ('C)= 25.88

T2 ('C)= 26.37

T3 ('C)= 26.86

---------------------------------------------------

Wednesday

14.01.2015

--

08:55:38

T('C)=

25.88

T1 ('C)= 25.88

T2 ('C)= 26.37

T3 ('C)= 26.86

---------------------------------------------------

Wednesday

14.01.2015

--

08:56:52

T('C)=

25.88

T1 ('C)= 25.88

T2 ('C)= 26.37

T3 ('C)= 26.86

---------------------------------------------------

Wednesday

14.01.2015

--

34

08:58:09

T('C)=

25.88

T1 ('C)= 26.37

T2 ('C)= 26.37

T3 ('C)= 26.86

---------------------------------------------------

Wednesday

14.01.2015

--

08:59:24

T('C)=

25.88

T1 ('C)= 26.37

T2 ('C)= 26.86

T3 ('C)= 26.86

---------------------------------------------------

Wednesday

14.01.2015

--

09:00:40

T('C)=

25.88

T1 ('C)= 26.37

T2 ('C)= 26.86

T3 ('C)= 26.86

---------------------------------------------------

Wednesday

14.01.2015

--

09:01:57

T('C)=

26.37

T1 ('C)= 26.37

T2 ('C)= 26.86

T3 ('C)= 27.34

---------------------------------------------------

Wednesday

14.01.2015

--

09:03:12

T('C)=

26.37

T1 ('C)= 26.86

T2 ('C)= 26.86

T3 ('C)= 27.34

---------------------------------------------------

Wednesday

14.01.2015

--

09:04:30

35

T('C)=

26.37

T1 ('C)= 26.86

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:05:46

T('C)=

26.86

T1 ('C)= 26.86

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:07:02

T('C)=

26.86

T1 ('C)= 27.34

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:08:20

T('C)=

26.86

T1 ('C)= 26.86

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:09:36

T('C)=

26.86

T1 ('C)= 26.86

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:10:54

T('C)=

36

26.86

T1 ('C)= 26.86

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:12:12

T('C)=

27.83

T1 ('C)= 29.30

T2 ('C)= 29.30

T3 ('C)= 29.79

---------------------------------------------------

Wednesday

14.01.2015

--

09:13:28

T('C)=

31.74

T1 ('C)= 33.20

T2 ('C)= 33.69

T3 ('C)= 33.20

---------------------------------------------------

Wednesday

14.01.2015

--

09:14:46

T('C)=

27.83

T1 ('C)= 27.83

T2 ('C)= 29.79

T3 ('C)= 29.79

---------------------------------------------------

Wednesday

14.01.2015

--

09:16:04

T('C)=

26.37

T1 ('C)= 26.86

T2 ('C)= 28.32

T3 ('C)= 28.32

---------------------------------------------------

Wednesday

14.01.2015

--

09:17:22

T('C)=

25.88

37

T1 ('C)= 25.88

T2 ('C)= 27.83

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:18:42

T('C)=

25.88

T1 ('C)= 26.37

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:20:00

T('C)=

26.37

T1 ('C)= 26.86

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:21:18

T('C)=

26.37

T1 ('C)= 26.37

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:22:38

T('C)=

26.37

T1 ('C)= 26.37

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:23:56

T('C)=

26.37

T1 ('C)= 26.37

38

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:25:16

T('C)=

26.37

T1 ('C)= 26.86

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:26:34

T('C)=

26.37

T1 ('C)= 26.37

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:27:54

T('C)=

26.37

T1 ('C)= 26.37

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:29:14

T('C)=

26.37

T1 ('C)= 26.37

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:30:34

T('C)=

26.37

T1 ('C)= 26.37

T2 ('C)= 26.86

39

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:31:54

T('C)=

25.88

T1 ('C)= 26.37

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:33:14

T('C)=

26.37

T1 ('C)= 25.88

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:34:34

T('C)=

25.88

T1 ('C)= 26.37

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:35:56

T('C)=

25.88

T1 ('C)= 26.37

T2 ('C)= 27.34

T3 ('C)= 27.34

---------------------------------------------------

Wednesday

14.01.2015

--

09:37:16

T('C)=

25.88

T1 ('C)= 25.88

T2 ('C)= 27.34

T3 ('C)= 27.34

40

---------------------------------------------------

Wednesday

14.01.2015

--

09:38:36

T('C)=

25.88

T1 ('C)= 26.37

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:39:58

T('C)=

25.88

T1 ('C)= 26.37

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

Wednesday

14.01.2015

--

09:41:18

T('C)=

26.37

T1 ('C)= 26.37

T2 ('C)= 27.34

T3 ('C)= 27.34

---------------------------------------------------

Wednesday

14.01.2015

--

09:42:40

T('C)=

26.37

T1 ('C)= 26.37

T2 ('C)= 27.34

T3 ('C)= 27.83

---------------------------------------------------

41