SWT 2000 Leaflet
5
SWT-2000 Transfer Unit UK: T : +44 1904 608 999 E: [email protected] China: T : +86 755 8222 5976 E: [email protected] om www.sheppee.com Features and Benefits • 3 Finger Sizes • 4 Finger Spacing Configurations • ‘Quick Change’ Hardened Stainless Fingers • Transfers Containers from 20mm to 60mm diameter however over 45mm Sheppee would recommend the HST transfer. • Adjustable T op and Botto m Ware Guides • Spacing Reduced by 40% through Transfer • Reduced Job Set Up Time • Enhanced Container Stability • Reliable Cross Conveyor Spacing • Minimal Spares Holding • Consistent Ware Handling Up To 300BPM • Use in Conjunction With Sheppee Cross Conveyor • Recommended Service Intervals 12 Months • Carbon or SSB insulation • Fingers Designed To Customer Requirements The SWT 2000 transfer unit has been specifically designed for the transfer of small ware products such as pharmaceutical and cosmetic container s to a max. Dia of 45mm and a max. height of 75mm. The SWT 2000 transfer unit is suitable for single and double Gob lines. The transfer offers, stability , precision and control when transferring containers from the machine conveyor onto the cross conveyor. With minimal downtime and effort, it is very simple procedure to change the finger spacing configuration.
Transcript of SWT 2000 Leaflet
8/10/2019 SWT 2000 Leaflet
http://slidepdf.com/reader/full/swt-2000-leaflet 1/4
SWT-2000 Transfer Unit
UK: T: +44 1904 608 999 E: [email protected] China: T: +86 755 8222 5976 E: [email protected] www. sheppee.com
Features and Benets• 3 Finger Sizes
• 4 Finger Spacing Congurations
• ‘Quick Change’ Hardened Stainless Fingers
• Transfers Containers from 20mm to 60mmdiameter however over 45mm Sheppee wouldrecommend the HST transfer.
• Adjustable Top and Bottom Ware Guides
• Spacing Reduced by 40% through Transfer
• Reduced Job Set Up Time
• Enhanced Container Stability
• Reliable Cross Conveyor Spacing
• Minimal Spares Holding
• Consistent Ware Handling Up To 300BPM
• Use in Conjunction With Sheppee Cross Conveyor
• Recommended Service Intervals 12 Months
• Carbon or SSB insulation• Fingers Designed To Customer Requirements
The SWT 2000 transfer unit has been specically designed for the transfer of small wareproducts such as pharmaceutical and cosmetic containers to a max. Dia of 45mm and a max.height of 75mm. The SWT 2000 transfer unit is suitable for single and double Gob lines. Thetransfer offers, stability, precision and control when transferring containers from the machineconveyor onto the cross conveyor. With minimal downtime and effort, it is very simple
procedure to change the nger spacing conguration.
8/10/2019 SWT 2000 Leaflet
http://slidepdf.com/reader/full/swt-2000-leaflet 2/4
Halifax Way, Aireld Business Park, Elvington, York, YO41 4AU T: +44 1904 608 999 F: +44 1904 608 777 E: [email protected]
page1 when you open the leaet out
SWT-2000 Transfer Unit
Chain Length Data
Technical SpecicationsOperating Speed: Up to 300BPM
Chain Length: 72”*
Chain Pitch: 3⁄4” Duplex
Number of Teeth onDrive Sprocket: 24
Chain Movement perRevolution of Drive Shaft: 18”
Installation and ServiceRequirements• Connection to Lincoln Lubrication• Can be Driven by Servo or Synchronous Motor
Drive• Can Work with all I.S. Machine Drive Systems
• Coupling Supplied to Suit any Drive Gearbox
*see chart below
8/10/2019 SWT 2000 Leaflet
http://slidepdf.com/reader/full/swt-2000-leaflet 3/4
China: Sheppee-AP Sales & Support Centre, Shenzhen, China, T: +86 755 8222 5976 E: [email protected]
SWT-2000 Transfer Unit
Finger Spacing Options
Number Finger Finger Part Containerof Fingers Spacing Number* Size Limits**
32 2 1⁄2” SWT-2017-01-L/R 30mm
24 3” SWT-2017-02-L/R 40mm
16 4 1⁄2” SWT-2017-03-L/R 60mm***
12 6” SWT-2017-03-L/R 50mm wide x 80mm long
*For SSB (Stainless Steel Braid) option add SSB to the part number, i.e. (insert any part number from the chart)-SSB** When using SSB Insulation Container Size Limits should be reduced by 2mm***Although the 4 1⁄2” nger can take a diameter up to 60mm Sheppee recommend the HST transfer for anything over 45mm.
Contact Material Options
Carbon – Standard
Stainless Steel Braid - Optional
8/10/2019 SWT 2000 Leaflet
http://slidepdf.com/reader/full/swt-2000-leaflet 4/4
SWT-2000 Transfer Unit
UK: Halifax Way, Aireld Business Park, Elvington, York, YO41 4AUT: +44 1904 608 999 F: +44 1904 608 777E: [email protected]
China: Sheppee-AP Sales & Support Centre, Shenzhen, China,T: +86 755 8222 5976 E: [email protected]
www. sheppee.com
V1.0
Standard Finger AssemblyPart Number Description
SWT-2017-01-L/R Size 01 Finger AssemblySWT-2017-02-L/R Size 02 Finger Assembly
SWT-2017-03-L/R Size 03 Finger Assembly
SWT-055 Size 01 Pusher PadSWT-069 Size 02 Pusher PadSWT-072 Size 03 Pusher Pad
C261-009 72” Chain
SWT-044A Upper Ware Guide Insulator A
SWT-044B Upper Ware Guide Insulator B
SWT-044C Upper Ware Guide Insulator C
SWT-043A Lower Ware Guide Insulator A
SWT-043B Lower Ware Guide Insulator B
SWT-043C Lower Ware Guide Insulator C
SWT-074 Finger Carrier
Variable and Consumable Item Identication Chart
For Stainless Steel Braid add SSB to the part number.For all additional parts refer to assembly drawings.
