UNIVERSITI TUN HUSSEIN ONN MALAYSIA

Fakulti/Pusat Pengajian (Faculty/Centre) : FACULTY OF ELECTRICAL AND ELECTRONIC ENGINEERING

Mukasurat (Page): 1/4

Kod Kursus (Course Code): BEL20303

Nama Kursus (Name of Course) : DIGITAL ELECTRONICS

Kursus Pra Syarat (Prerequisite Courses) :None

Kredit(Credit):

3

Kuliah(Lecture):

3

Tutorial :

0

Amali(Practical):

0

Edisi (Edition) : 2 Tarikh Keluaran (Published date) : June 2012

MATLAMAT (GOALS):

To build comprehensive understanding on logic system and digital electronic application.

HASIL PEMBELAJARAN (LEARNING OUTCOMES):

At the end of this course the student will be able to:1. Analyse the operation of functional combinatorial and sequential logic circuit. (PLO4- CTPS-C4)2. Construct a simple digital system using simulation tools. (PLO10-P4)3. Discuss importance of digital circuits in current technology trend. (PLO11-A2)

SINOPSIS (SYNOPSIS):

This course is the first course in digital electronics. Beginning with representing physical values in digital form using binary, octal and hexadecimal numbering system, conversion between these numbering systems, also representation of values in codes such as BCD and Gray. This is followed by representing negative values in binary, binary arithmetic and BCD addition. Basic logic gates and symbols are introduced as well as Boolean expressions, truth tables and timing diagrams. Combining basic gates to implement certain function, and analyzing circuits to obtain its Boolean expression, simplify using Boolean theorem and Karnaugh-map approach. In digital arithmetic, adder circuits are introduced, starting from half adder, full adder and the design of the carry look ahead adder and BCD adder. Then, on to MSI logic circuits such as encoder, decoder, multiplexer and demultiplexer. Memory elements such as latches and flip-flops are introduced followed by flip-flop applications in counters and registers. ADCs and DACs are also included. The final topic is on integrated circuit family characteristic and technology.

ISI KANDUNGAN (CONTENT):

BAB(CHAPTER)

KANDUNGAN (CONTENTS)

1.0 Introduction To Digital System (2 Hours)1.1Numerical representation1.2Digital and analog system1.3Advantages of using digital over analog1.4Limitation of digital system1.5Overcoming the limitation of an analog world

2.0 Numerical Representation (4 Hours)2.1Binary system2.2Binary arithmetic 2.3Signed and unsigned numbers. 2.4Signed numbers arithmetic operation

UNIVERSITI TUN HUSSEIN ONN MALAYSIA

Fakulti/Pusat Pengajian (Faculty/Centre) : FACULTY OF ELECTRICAL AND ELECTRONIC ENGINEERING

Mukasurat (Page): 2/4

Kod Kursus (Course Code): BEL20303

Nama Kursus (Name of Course) : DIGITAL ELECTRONICS

Kursus Pra Syarat (Prerequisite Courses) :None

Kredit(Credit):

3

Kuliah(Lecture):

3

Tutorial :

0

Amali(Practical):

0

Edisi (Edition) : 2 Tarikh Keluaran (Published date) : June 2012

2.5Hexadecimal numbering system2.6Octal numbering system2.7Digital codes, BCD, Gray, ASCII, error detection 2.8BCD addition

3.0 Basic Gates and Combinational Logic Circuit (8 Hours)3.1Introduction to basic gates3.2Analyzing combinational logic circuits.3.3Designing a logic circuit from Boolean expression3.4Designing a logic circuit from truth table3.5Boolean theorem and Karnaugh-map approach3.6Universality of the NAND and NOR gates

4.0 Function of Combinational Logic Circuit (8 Hours)4.1Half adder and full adder circuits4.24-bit parallel binary ripple carry adder circuit4.34-bit parallel binary carry look ahead adder circuit4.4BCD adder circuit4.5Decoder and Encoder4.6Multiplexer and Demultiplexer4.7Comparator4.8Code converters4.9Parity generator and checker

5.0 Flip-Flops (6 Hours)5.1NAND and NOR latch5.2D latch5.3Active high and active low concept5.4Edge triggered SC flip-flop5.5Edge triggered JK flip-flop5.6Edge triggered D flip-flop5.7Flip-flop applications

6.0 Counters and Registers (6 Hours)6.1Asynchronous counter6.2Synchronous counter6.3Counter applications6.4Design using the Finite State Machine method6.5Serial in/serial out shift register6.6Serial in/parallel out shift register6.7Parallel in/parallel out shift register6.8Parallel in/serial out shift register

UNIVERSITI TUN HUSSEIN ONN MALAYSIA

Fakulti/Pusat Pengajian (Faculty/Centre) : FACULTY OF ELECTRICAL AND ELECTRONIC ENGINEERING

Mukasurat (Page): 3/4

Kod Kursus (Course Code): BEL20303

Nama Kursus (Name of Course) : DIGITAL ELECTRONICS

Kursus Pra Syarat (Prerequisite Courses) :None

Kredit(Credit):

3

Kuliah(Lecture):

3

Tutorial :

0

Amali(Practical):

0

Edisi (Edition) : 2 Tarikh Keluaran (Published date) : June 2012

7.0 Interfacing Digital System with Analog (4 Hours)7.1 Digital-to-analog conversion7.2 DAC circuitry7.3 Integrated DAC circuit7.4 Analog-to-digital conversion7.5 Digital-ramp ADC.7.6 Successive approximation ADC 7.7 Flash ADC

8.0 Integrated Logic Circuit Family (4 Hours)8.1Digital IC terminology8.2MOS and CMOS technology 8.3TTL logic 8.4TTL and CMOS logic family8.5 IC datasheet

PENILAIAN (ASSESSMENT):

Course Work 50%Final Examination 50% 100%

RUJUKAN (REFERENCES):

1. J. Floyd, Digital Fundamental, Merill MacMillan, 2009. Call number: TK7868.D5 .F564 20092. J. Tocci, Digital System, Principles and Application, Prentice Hall, 2011. Call number:

TK7868.D5 .T62 20113. M. Morris Mano, Charles R. Kime, Logic and Computer Design Fundamentals, 4th Ed., Prentice

Hall, 2008. Call number: TK7888.4 .M36 20084. Ferdjallah, Mohammed, Introduction to digital systems : modeling, synthesis, and simulation using

VHDL / Mohammed Ferdjallah., John Wiley, 2011. Call numer: TK7868.D5 .F47 20115. Kharate, G. K., Digital electronics, New Delhi : Oxford University Press, 2010. Call number :

TK7868.D5 .K42 20106. Jain, R. P., Modern digital electronics, McGraw-Hill, 2010. Call number: TK7868.D5 .J34 20107. Roger L. Tokheim, Digital electronics : principles and applications, McGraw-Hill, 2008. Call

number: TK7868.D5 .T644 2008

UNIVERSITI TUN HUSSEIN ONN MALAYSIA

Fakulti/Pusat Pengajian (Faculty/Centre) : FACULTY OF ELECTRICAL AND ELECTRONIC ENGINEERING

Mukasurat (Page): 4/4

Kod Kursus (Course Code): BEL20303

Nama Kursus (Name of Course) : DIGITAL ELECTRONICS

Kursus Pra Syarat (Prerequisite Courses) :None

Kredit(Credit):

3

Kuliah(Lecture):

3

Tutorial :

0

Amali(Practical):

0

Edisi (Edition) : 2 Tarikh Keluaran (Published date) : June 2012

JAM BELAJAR PELAJAR (STUDENT LEARNING TIME - SLT):

Category of Activities Activities Total Hours/Semester

Guided Learning Lecture 36

Tutorial/Practical 0

Student Centred Learning Activities 6

Self Learning Activities Preparation for assignments/projects 32

Independent study/revisions 36

Preparation for assessment 5

Formal Assessments Continuous assessments 2.5

Final Examination 2.5

Total SLT Hours 120

Disediakan oleh (Prepared by):Tandatangan (Signature): Nama (Name): Muhammad Shukri AhmadJawatan (Post): LecturerTarikh (Date): June 2012

Disemak oleh (Checked by) :Tandatangan (Signature): Nama (Name): Dr. Muhammad Mahadi bin Abdul Jamil Jawatan (Post): Head of DepartmentTarikh (Date): June 2012