JURNAL 5

Jawaban:

PROSES REVIEW

Fwd: CFDRI2015- Extended Date Yahoo/Email Masuk

• Prof. Dr Farid Nasir Ani C23-325(JTB) <farid@mail.fkm.utm.my>

Kepada:m.anshar60@yahoo.com

27 Mei 2015 jam 15.28

Salam

Boleh hantar CFD paper on MSW incineration ke conference ini?

Prof Ir Dr Farid Nasir Ani, MIEM, PEng, FSOE(UK), FIPlantE(UK), MIMarEST(UK), CEng. MASHRAE.

---------- Forwarded message ---------- From: CFDRI UTHM <cfdri@uthm.edu.my> Date: Wed, May 27, 2015 at 2:57 PM Subject: CFDRI2015- Extended Date To:

Last chance to submit your papers for CFDRI 2015 The Organising Committee has extended the Call for Papers one final time to Sunday, 14th June 2015. This means there are now only 18 days to submit your full paper for participation in the CFDRI 2015.

Call for Papers

COMPUTATIONAL FLUID DYNAMICS IN RESEARCH & INDUSTRY 2015

(CFDRI2015) Date: 17th – 19nd August 2015| Venue: Kuala Lumpur, Malaysia

Full Paper Submission Deadline: 14 June 2015 Website: http://cfdri.uthm.edu.my/

Komentar untuk karya penelitian : 'Judul Artikel: Co-Combustion Modeling of Rice Husk and

Plastic Bag as Energy Sources in Indonesia, Penulis: Muhammad Anshar, FaridNasirAni,

AbSaman Kader, Nama Jurnal: ARPN Journal of Engineering and Applied Sciences , Volume

Jurnal: 12, Nomor Jurnal: 10, TahunTerbit Jurnal: 2017, Halaman: 3105-3111, ISSN: 1819-

6608, Penerbit: Asian Research Publishing Network (ARPN)': Jurnal ini termasuk dalam daftar

yang perlu mendapatkan perhatian. Untuk dapat menjustifikasi paper ini dengan baik mohon

pengusul penyertakan dokumentasi proses review.

Email: cfdri@uthm.edu.my or cfdri2015@gmail.com The International Conference on Computational Fluid Dynamics in Research and Industry 2015 (CFDRI2015) organized by FKMP UTHM and CAD-IT (Malaysia) is an event focusing mainly on the application of Computational Fluid Dynamics (CFD) in academic and industrial research. This event, being the first of its kind in Malaysia aims at bringing together researchers from the academia and the industry from various engineering disciplines to exchange knowledge, experience and ideas in this branch of study. The conference will run in parallel sessions with topics covering the application of CFD in the following fields: Topics of Interest # CFD Methods # Fluid Flows Characterisation # Heat Transfer # Turbulence Analysis # Fluid Structure Interaction # Combustion # Indoor Air Quality # Industrial Environmental # Spray Analysis # Heat Exchangers # Automotive Engineering # Electronics # Porous Media Flow # Fluid Machines # Aerodynamics Publication and Index All accepted peer-reviewed papers of the CFDRI2015 will be published in ARPN Journal of Engineering. This publications is indexed by SCOPUS. Paper Submission To submit a paper, please go to the Submission site via the link available at the CFDRI2015 website: http://cfdri.uthm.edu.my/

Each paper must deal with original and unpublished work, not submitted for publication elsewhere (copyright problems fall entirely under responsibility of the authors). Each paper will be reviewed by at least two experts in the relevant field ensuring the publication of only top quality contributions.

Important Dates Paper submission (Full Paper) : 14 June 2015 Notification of Acceptance : 21 June 2015 Revised paper submission : 5 July 2015 Paper Registration and Payment : Before 12 July 2015 CFDRI2015 Conference : 17 – 19 August 2015 Contact Information Centre for Energy & Industrial Environment Studies, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat, Johor, Malaysia. Website: http://cfdri.uthm.edu.my/ Phone: +607-4537708 (Office) +6019-9534300 (Dr. Norzelawati) +6019-7152881 (Dr. Mas Fawzi) +6019-7272808 (Dr. Azian) Fax: +607-4536080 Email: cfdri@uthm.edu.my or cfdri2015@gmail.com facebook:http://www.facebook.com/cfdri2015 *Please accept our apology if you have received this announcement email earlier. Thank you

------- CONFIDENTIALITY NOTICE: This e-mail contains confidential information, which is intended only for the use of the recipient(s) named above. If you have received this communication in error, please notify the sender immediately via e-mail and return the entire message. Please email to abuse @ uthm.edu.my if you found this email to be fraud. University Tun Hussein Onn Malaysia | www.uthm.edu.my

Unduh semua lampiran sebagai file zip

o

CFP ICCFD'15 update 26.5.15-01.jpg

538.1kB

o

arpn_template CFDRI2015-.doc

468.5kB

Re: [CFDRI 2015] Confirmation Registration - Muhammad Anshar Yahoo/Email Masuk

• Nurul Fitriah Nasir <fitriah@uthm.edu.my>

Kepada:M.Anshar60@yahoo.com

Cc:wazrina@uthm.edu.my,mariam@uthm.edu.my

27 Jul 2015 jam 10.30

Assalamualaikum wbt & Salam Sejahtera

Terima kasih kerana mendaftar CFDRI2015.

Saya selaku wakil unit pendaftaran ingin memohon agar Saudara Muhammad Anshar

dapat memuat naik dokumen yang diperlukan iaitu:

1. Slip pembayaran yuran persidangan

2. Kad pelajar.

Terima Kasih.

Thanks and Regards; ****************************************************

NURUL FITRIAH BINTI NASIR Department of Plant and Automotive Engineering Faculty of Mechanical and Manufacturing Engineering Universiti Tun Hussein Onn Malaysia (UTHM) 86400 Parit Raja, Batu Pahat, Johor. Tel: +607-4538844 H/P: +6012-7521090 https://community.uthm.edu.my/fitriah https://scholar.google.com/citations?user=YcACms0AAAAJ&hl=en http://orcid.org/0000-0003-0467-5593 ****************************************************

From: "CFDRI2015 Online Registration via CFDRI2015 Online Registration" <cfdri2015@myconferences.org> To: fitriah@uthm.edu.my Sent: Monday, 27 July, 2015 11:14:58 Subject: [CFDRI 2015] Confirmation Registration - Muhammad Anshar

Submitted on Monday, 27 July, 2015 - 11:14 Thank you for your registration to CFDRI2015 The registration data is as follows: ==Information== ==Basic Information== Salutation: Mr. Name: Muhammad Anshar Email: M.Anshar60@yahoo.com Affiliation: Universiti Teknologi Malaysia (UTM) Country: Malaysia Registration Type: Conference ==Participant Status and Payment== Participant Status: Presenter Student Status: Yes Payment slip / letter:

http://cfdri2015.myconferences.org/sites/default/files/webform/payment/Anshar%20CFD%20ARPM%2022-7-2015%20.doc Payment explanation: Upload student card: http://cfdri2015.myconferences.org/sites/default/files/webform/student-card/Muhammad%20Anshar-28.doc How many papers: 1 ==Paper #1== Paper ID: 1179 Paper Title: CO-COMBUSTION MODELING OF RICE HUSK AND PLASTIC BAG AS ENERGY SOURCE IN INDONESIA CO-COMBUSTION MODELING OF RICE HUSK AND PLASTIC BAG AS ENERGY SOURCE IN INDONESIA CO-COMBUSTION MODELING OF RICE HUSK AND PLASTIC BAG AS ENERGY SOURCE IN INDONESIA Authors: Muhammad Anshar, Farid Nasir Ani1, Ab Saman Kader Presenter Name: Muhammad Anshar Copyright form: http://cfdri2015.myconferences.org/sites/default/files/webform/Anshar%20CFD%20ARPM%2022-7-2015%20.doc Attendance: Yes CFDRI2015 Registration Online System Any inquiries regarding registration, please contact CFDRI2015 Registration Unit Dr.Nurul Fitriah Binti Nasir 07-4538844 fitriah@uthm.edu.my Dr. Wan Nur Azrina Binti Wan Muhammad 07-4533725 wazrina@uthm.edu.my Pn Siti Mariam Binti Basharie 07-4537823

mariam@uthm.edu.my => This message is appended by UTHM Mail Server <======== Towards a sustainable earth: Print only when necessary. Please do not respond to any or this email requesting banking account, password or verification PTM Callcenter 07-4537292/95.

------- CONFIDENTIALITY NOTICE: This e-mail contains confidential information, which is intended only for the use of the recipient(s) named above. If you have received this communication in error, please notify the sender immediately via e-mail and return the entire message. Please email to abuse @ uthm.edu.my if you found this email to be fraud. University Tun Hussein Onn Malaysia | www.uthm.edu.my

[CFDRI2015] Upload final Version for CFDRI2015 Yahoo/Email Masuk

• Dr Amir Khalid <amirk@uthm.edu.my>

Kepada:farid@mail.fkm.utm.my

Cc:M.Anshar60@yahoo.com,abdsaman@fkm.utm.my

26 Jul 2015 jam 15.26

Prof Dr Farid Nasir Ani:

1. The corresponding author (the paper submitter) should upload the final

version and register as indicated in the acceptance letter. Please refer to

the attached file for the detail of revise paper submission procedure.

2. The corresponding author should prepare the final version of the

paper. The format must be.doc or docx.(very important)

3. Please follow the conference format. The AuthorTemplate.doc (refer to

conference

website)(http://cfdri.uthm.edu.my/index.php/paper-submission/author-guidelines)

has incorporated the paper format for ARPN Journal of Engineering and

Applied Sciences. Follow the author’s guidelines as written in the author

ARPN template. This is to make sure your paper will be included in the ARPN

journal.

4. Each paper is normally between 5 to 8 pages, and additional pages

might be charged. Please follow the Conference format. Authors who would

like to publish articles with extra pages in CFDRI 2015; the additional cost

is USD30 per page after the 8th page. Papers less than 5 pages should not be

submitted..

Thank you and looking forward to your participation in this event.

Dr Amir Khalid

Universiti Tun Hussein Onn Malaysia

amirk@uthm.edu.my

________________________________________________________________________

CFDRI2015 International Conference on Computational Fluid Dynamics in

Research and Industry 2015 (CFDRI 2015)

http://cfdri.uthm.edu.my

http://myconferences.org/index.php/cfdri2015/cfdri2015/index

o

Tanpa Judul

257.8kB

Fwd: [CFDRI2015] Upload final Version for CFDRI2015 Yahoo/Email Masuk

• Prof. Dr Farid Nasir Ani C23-325(JTB) <farid@mail.fkm.utm.my>

Kepada:muhammadwwn@gmail.com,m.anshar60@yahoo.com

26 Jul 2015 jam 14.54

Salam

Please upload the paper, Pak Anshar. Thanks

Prof Ir Dr Farid Nasir Ani, MIEM, PEng, FSOE(UK), FIPlantE(UK), MIMarEST(UK), CEng. MASHRAE.

---------- Forwarded message ---------- From: Dr Amir Khalid <amirk@uthm.edu.my> Date: Sun, Jul 26, 2015 at 12:44 AM Subject: [CFDRI2015] Upload final Version for CFDRI2015 To: Prof Dr Farid Nasir Ani <farid@mail.fkm.utm.my>

1. The corresponding author (the paper submitter) should upload the final version and register as indicated in the acceptance letter. Please refer to the attached file for the detail of revise paper submission procedure. 2. The corresponding author should prepare the final version of the paper. The format must be.doc or docx.(very important) 3. Please follow the conference format. The AuthorTemplate.doc (refer to conference website)(http://cfdri.uthm.edu.my/index.php/paper-submission/author-guidelines) has incorporated the paper format for ARPN Journal of Engineering and Applied Sciences. Follow the author’s guidelines as written in the author ARPN template. This is to make sure your paper will be included in the ARPN journal. 4. Each paper is normally between 5 to 8 pages, and additional pages might be charged. Please follow the Conference format. Authors who would like to publish articles with extra pages in CFDRI 2015; the additional cost is USD30 per page after the 8th page. Papers less than 5 pages should not be submitted. ________________________________________________________________________ CFDRI2015 International Conference on Computational Fluid Dynamics in Research and Industry 2015 (CFDRI 2015) http://cfdri.uthm.edu.my http://myconferences.org/index.php/cfdri2015/cfdri2015/index

Bls: Fwd: [CFDRI2015] Editorial Decision on Paper Yahoo/Email Masuk

• Muhammad Anshar <m.anshar60@yahoo.com>

Kepada:m.anshar60@yahoo.com

24 Jul 2015 jam 16.27

Salam,

Apologize, I send paper that has been corrected based on the advice of the reviewer.

Thank you for your cooperation.

Wassalam,

Muhammad Anshar

Pada Senin, 13 Juli 2015 12:21, Prof. Dr Farid Nasir Ani C23-325(JTB) <farid@mail.fkm.utm.my> menulis:

Salam

Please read the comments below for corrections of paper. Thanks

Prof Ir Dr Farid Nasir Ani, MIEM, PEng, FSOE(UK), FIPlantE(UK), MIMarEST(UK), CEng. MASHRAE.

---------- Forwarded message ---------- From: Dr Amir Khalid <amirk@uthm.edu.my> Date: Sun, Jul 12, 2015 at 9:11 PM Subject: [CFDRI2015] Editorial Decision on Paper To: Prof Dr Farid Nasir Ani <farid@mail.fkm.utm.my> Cc: Muhammad Anshar <M.Anshar60@yahoo.com>, Ab Saman Kader <abdsaman@fkm.utm.my>, azian@uthm.edu.my, norzela@uthm.edu.my Prof Dr Farid Nasir Ani: After a careful review of your submission, "CO-COMBUSTION MODELING OF RICE HUSK AND PLASTIC BAG AS ENERGY SOURCE IN INDONESIA" will be considered for presentation at CFDRI2015 if the following revisions are successfully implemented. Thank you and looking forward to your participation in this event. Dr Amir Khalid Universiti Tun Hussein Onn Malaysia amirk@uthm.edu.my ------------------------------------------------------

Reviewer A: (Q1) Title: Is it adequate and appropriate for the content of the article?: Yes, appropriate. (Q2) Abstract: Does it contain the essential information of the paper? Is it complete? Is it suitable for inclusion by itself in an abstracting service?: No, the author should revise the abstract. (Q3) Diagrams, figures, tables and references: Are they essential and clear?: No, the author should make sure all are readable, captioned and cited in the text. (Q4) Conclusion: Does the paper contain a carefully written conclusion, summarizing what has been learned and why it is interesting and useful?: Yes. (Q5) Originality: Is the work relevant and novel?: Moderate (Q6) Repetition: Have significant parts of the manuscript already been published?: Acceptable (Q7) Scientific merit: notably scientific rigour, accuracy and correctness.: Moderate (Q8) Clarity of expression; communication of ideas; readability and discussion of concepts.: Moderate (Q9) Additional comments to the author: This paper contains a lot of grammatical and spelling errors. The following sections need to be corrected: 1. Abtract (grammatical) 2. Geometry Model of Furnace... 28.875 nodes? 3. Pg.2, Furnace geometry sentence has duplicate 4. Table-2, format & spacing 5. Figure-2, caption should be in the same column

6. ".. all the water content in RH90 + PB10 turn into gas phase." Water will always be H2O whether it is in liquid or gaseous phase 7. Pg. 4, "... furnace showe..." 8. Figure-5 "Countur" 9. References, font sizes 4. ------------------------------------------------------ ------------------------------------------------------

Reviewer B:

(Q1) Title: Is it adequate and appropriate for the content of the article?: Yes, appropriate. (Q2) Abstract: Does it contain the essential information of the paper? Is it complete? Is it suitable for inclusion by itself in an abstracting service?: Yes, can be accepted as it is. (Q3) Diagrams, figures, tables and references: Are they essential and clear?: No, the author should make sure all are readable, captioned and cited in the text. (Q4) Conclusion: Does the paper contain a carefully written conclusion, summarizing what has been learned and why it is interesting and useful?: Yes. (Q5) Originality: Is the work relevant and novel?: Moderate (Q6) Repetition: Have significant parts of the manuscript already been published?: Acceptable (Q7) Scientific merit: notably scientific rigour, accuracy and correctness.: Moderate (Q8) Clarity of expression; communication of ideas; readability and discussion of concepts.: Very good (Q9) Additional comments to the author: Dear authors, i personally think that this is an interesting paper to share the findings. However, minor correction is required in this paper. Please allow me to share a few comments about this paper: 1. Kindly please re-arrange/align Table 2 in proper row and column. 2. Please check the wording for figure 2, where it should be close to the picture. 3. The graph for figure 2 seem like your expending the picture by not considering the ratio. I appreciate if your can replace with a proper quality and actual size for better illustration. 4. The authors are recommended to explain important symbol in presented equations. I believed that some of reference books are using different symbol and meaning. 5. Please provide some validation analysis to support your simulation works. Pending to attention and response to the comments above, I recommend this manuscript to be accepted. ------------------------------------------------------ ------------------------------------------------------ Reviewer C: (Q1) Title: Is it adequate and appropriate for the content of the article?: Yes, appropriate. (Q2) Abstract: Does it contain the essential information of the paper? Is it complete? Is it suitable for inclusion by itself in an abstracting service?:

Yes, can be accepted as it is. (Q3) Diagrams, figures, tables and references: Are they essential and clear?: Yes. (Q4) Conclusion: Does the paper contain a carefully written conclusion, summarizing what has been learned and why it is interesting and useful?: Yes. (Q5) Originality: Is the work relevant and novel?: Moderate (Q6) Repetition: Have significant parts of the manuscript already been published?: Acceptable (Q7) Scientific merit: notably scientific rigour, accuracy and correctness.: Moderate (Q8) Clarity of expression; communication of ideas; readability and discussion of concepts.: Very good (Q9) Additional comments to the author: 1. Figure must be inserted immediately after the citation in the text. 2. Title of Figure 2 was shifted to the other column . ------------------------------------------------------ ---------------------------------------------------------------------------------

Reviewer’s Report

----------------------------------------------------------------------------- 1. Please follow the conference format. The AuthorTemplate.doc (refer to conference website)( http://cfdri.uthm.edu.my/index.php/paper-submission/author-guidelines) has incorporated the paper format for ARPN Journal of Engineering and Applied Sciences. Follow the author’s guidelines as written in the author ARPN template. This is to make sure your paper will be included in the ARPN journal. 2. The corresponding author should prepare the final version of the paper. The format must be .doc or docx. 3. Each paper is normally between 5 to 8 pages, and additional pages might be charged. Please follow the Conference format. Authors who would like to publish articles with extra pages in CFDRI 2015; the additional cost is USD 30 per page after the 8th page. Papers less than 5 pages should not be submitted. 4. The abstract of the paper should contain the motivation/problem statement, aims, methods, results and conclusion. 5. Introduction should contain the literature review, research background, problem statement, objective, scope and summary of research methodology. 6. All figures and tables must be clear and readable and also references MUST be cited in the text. 7. The corresponding author (the paper submitter) should upload the final version and register as indicated in the acceptance letter. 8. The manuscript needs to be edited for grammar and syntax. Amir Khalid, Dr. Eng. Department of Plant and Automotive Engineering, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat, Johor, Malaysia. https://community.uthm.edu.my/amirk http://scholar.google.com.my/citations?user=NFLDTQIAAAAJ&hl=en&oi=ao http://www.scopus.com/authid/detail.url?authorId=55655797100

______________________ ________________________________________________________________________ CFDRI2015 International Conference on Computational Fluid Dynamics in Research and Industry 2015 (CFDRI 2015) http://cfdri.uthm.edu.my http://myconferences.org/index.php/cfdri2015/cfdri2015/index

o

REVISI CFD ARPM 22-7-2015.doc

Bls: Fwd: [CFDRI2015] Editorial Decision on Paper Yahoo/Email Masuk

• Muhammad Anshar <m.anshar60@yahoo.com>

Kepada:m.anshar60@yahoo.com

24 Jul 2015 jam 16.27

Salam,

Apologize, I send paper that has been corrected based on the advice of the reviewer.

Thank you for your cooperation.

Wassalam,

Muhammad Anshar

Pada Senin, 13 Juli 2015 12:21, Prof. Dr Farid Nasir Ani C23-325(JTB) <farid@mail.fkm.utm.my> menulis:

Salam

Please read the comments below for corrections of paper. Thanks

Prof Ir Dr Farid Nasir Ani, MIEM, PEng, FSOE(UK), FIPlantE(UK), MIMarEST(UK), CEng. MASHRAE.

---------- Forwarded message ---------- From: Dr Amir Khalid <amirk@uthm.edu.my> Date: Sun, Jul 12, 2015 at 9:11 PM Subject: [CFDRI2015] Editorial Decision on Paper To: Prof Dr Farid Nasir Ani <farid@mail.fkm.utm.my> Cc: Muhammad Anshar <M.Anshar60@yahoo.com>, Ab Saman Kader <abdsaman@fkm.utm.my>, azian@uthm.edu.my, norzela@uthm.edu.my Prof Dr Farid Nasir Ani: After a careful review of your submission, "CO-COMBUSTION MODELING OF RICE HUSK AND PLASTIC BAG AS ENERGY SOURCE IN INDONESIA" will be considered for presentation at CFDRI2015 if the following revisions are successfully implemented. Thank you and looking forward to your participation in this event. Dr Amir Khalid Universiti Tun Hussein Onn Malaysia amirk@uthm.edu.my ------------------------------------------------------

Reviewer A: (Q1) Title: Is it adequate and appropriate for the content of the article?: Yes, appropriate. (Q2) Abstract: Does it contain the essential information of the paper? Is it complete? Is it suitable for inclusion by itself in an abstracting service?: No, the author should revise the abstract. (Q3) Diagrams, figures, tables and references: Are they essential and clear?: No, the author should make sure all are readable, captioned and cited in the text. (Q4) Conclusion: Does the paper contain a carefully written conclusion, summarizing what has been learned and why it is interesting and useful?: Yes. (Q5) Originality: Is the work relevant and novel?: Moderate (Q6) Repetition: Have significant parts of the manuscript already been published?: Acceptable (Q7) Scientific merit: notably scientific rigour, accuracy and correctness.: Moderate (Q8) Clarity of expression; communication of ideas; readability and discussion of concepts.: Moderate (Q9) Additional comments to the author: This paper contains a lot of grammatical and spelling errors. The following sections need to be corrected: 1. Abtract (grammatical) 2. Geometry Model of Furnace... 28.875 nodes? 3. Pg.2, Furnace geometry sentence has duplicate 4. Table-2, format & spacing 5. Figure-2, caption should be in the same column

6. ".. all the water content in RH90 + PB10 turn into gas phase." Water will always be H2O whether it is in liquid or gaseous phase 7. Pg. 4, "... furnace showe..." 8. Figure-5 "Countur" 9. References, font sizes 4. ------------------------------------------------------ ------------------------------------------------------

Reviewer B:

(Q1) Title: Is it adequate and appropriate for the content of the article?: Yes, appropriate. (Q2) Abstract: Does it contain the essential information of the paper? Is it complete? Is it suitable for inclusion by itself in an abstracting service?: Yes, can be accepted as it is. (Q3) Diagrams, figures, tables and references: Are they essential and clear?: No, the author should make sure all are readable, captioned and cited in the text. (Q4) Conclusion: Does the paper contain a carefully written conclusion, summarizing what has been learned and why it is interesting and useful?: Yes. (Q5) Originality: Is the work relevant and novel?: Moderate (Q6) Repetition: Have significant parts of the manuscript already been published?: Acceptable (Q7) Scientific merit: notably scientific rigour, accuracy and correctness.: Moderate (Q8) Clarity of expression; communication of ideas; readability and discussion of concepts.: Very good (Q9) Additional comments to the author: Dear authors, i personally think that this is an interesting paper to share the findings. However, minor correction is required in this paper. Please allow me to share a few comments about this paper: 1. Kindly please re-arrange/align Table 2 in proper row and column. 2. Please check the wording for figure 2, where it should be close to the picture. 3. The graph for figure 2 seem like your expending the picture by not considering the ratio. I appreciate if your can replace with a proper quality and actual size for better illustration. 4. The authors are recommended to explain important symbol in presented equations. I believed that some of reference books are using different symbol and meaning. 5. Please provide some validation analysis to support your simulation works. Pending to attention and response to the comments above, I recommend this manuscript to be accepted. ------------------------------------------------------ ------------------------------------------------------

Reviewer C:

(Q1) Title: Is it adequate and appropriate for the content of the article?: Yes, appropriate. (Q2) Abstract: Does it contain the essential information of the paper? Is it complete? Is it suitable for inclusion by itself in an abstracting service?:

Yes, can be accepted as it is. (Q3) Diagrams, figures, tables and references: Are they essential and clear?: Yes. (Q4) Conclusion: Does the paper contain a carefully written conclusion, summarizing what has been learned and why it is interesting and useful?: Yes. (Q5) Originality: Is the work relevant and novel?: Moderate (Q6) Repetition: Have significant parts of the manuscript already been published?: Acceptable (Q7) Scientific merit: notably scientific rigour, accuracy and correctness.: Moderate (Q8) Clarity of expression; communication of ideas; readability and discussion of concepts.: Very good (Q9) Additional comments to the author: 1. Figure must be inserted immediately after the citation in the text. 2. Title of Figure 2 was shifted to the other column . ------------------------------------------------------ ---------------------------------------------------------------------------------

Reviewer’s Report

----------------------------------------------------------------------------- 1. Please follow the conference format. The AuthorTemplate.doc (refer to conference website)( http://cfdri.uthm.edu.my/index.php/paper-submission/author-guidelines) has incorporated the paper format for ARPN Journal of Engineering and Applied Sciences. Follow the author’s guidelines as written in the author ARPN template. This is to make sure your paper will be included in the ARPN journal. 2. The corresponding author should prepare the final version of the paper. The format must be .doc or docx. 3. Each paper is normally between 5 to 8 pages, and additional pages might be charged. Please follow the Conference format. Authors who would like to publish articles with extra pages in CFDRI 2015; the additional cost is USD 30 per page after the 8th page. Papers less than 5 pages should not be submitted. 4. The abstract of the paper should contain the motivation/problem statement, aims, methods, results and conclusion. 5. Introduction should contain the literature review, research background, problem statement, objective, scope and summary of research methodology. 6. All figures and tables must be clear and readable and also references MUST be cited in the text. 7. The corresponding author (the paper submitter) should upload the final version and register as indicated in the acceptance letter. 8. The manuscript needs to be edited for grammar and syntax. Amir Khalid, Dr. Eng. Department of Plant and Automotive Engineering, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat, Johor, Malaysia. https://community.uthm.edu.my/amirk http://scholar.google.com.my/citations?user=NFLDTQIAAAAJ&hl=en&oi=ao http://www.scopus.com/authid/detail.url?authorId=55655797100

______________________ ________________________________________________________________________ CFDRI2015 International Conference on Computational Fluid Dynamics in Research and Industry 2015 (CFDRI 2015) http://cfdri.uthm.edu.my http://myconferences.org/index.php/cfdri2015/cfdri2015/index

o

REVISI CFD ARPM 22-7-2015.doc

CFDRI 2015 Acceptance Letter

Yahoo/Email Masuk

• CFDRI UTHM <cfdri@uthm.edu.my>

Kepada:M.Anshar60@yahoo.com,farid@mail.fkm.utm.my,abdsaman@fkm.utm.my

Cc:norzela@uthm.edu.my,amirk@uthm.edu.my

14 Jul 2015 jam 07.56

Good Day!

Dear Authors,

Attached here are the

1) Acceptance letter for CFDRI 2015

2) Paper template for CFDRI 2015

In order to complete the registration of your paper, the following THREE steps are required. 1. You are required to refurbish your paper based on reviewer comments which are made available in the online paper submission system before 5th JULY 2015. You are also required to ensure the final version of your paper is according to the given paper format.

2. You are required to complete the payment of the conference fees, at the latest 12th July 2015 through either cheque / local order / bank transfer. Details on the conference fees and the payment method is available at http://cfdri.uthm.edu.my/index.php/registration/payment-method 3. You are required to register through the registration online system, at the latest 12th July 2015, at http://cfdri2015.myconferences.org/ Thank you and we are looking forward to meeting you in Seri Pacific Hotel, Kuala Lumpur. Yours sincerely,

Secretariat

International Conference on Computational Fluid Dynamics in Research & Industry 2015 (CFDRI 2015) Faculty of Mechanical and Manufacturing Engineering Universiti Tun Hussein Onn Malaysia

------- CONFIDENTIALITY NOTICE: This e-mail contains confidential information, which is intended only for the use of the recipient(s) named above. If you have received this communication in error, please notify the sender immediately via e-mail and return the entire message. Please email to abuse @ uthm.edu.my if you found this email to be fraud. University Tun Hussein Onn Malaysia | www.uthm.edu.my

Unduh semua lampiran sebagai file zip

o

arpn_template CFDRI2015-.doc

467.5kB

o

1179.pdf

56.6kB

Prof. Dr Farid Nasir Ani C23-325(JTB) <farid@mail.fkm.utm.my>

Kepada:m.anshar60@yahoo.com 13 Jul 2015 jam 11.21

Salam

Please read the comments below for corrections of paper. Thanks

Prof Ir Dr Farid Nasir Ani, MIEM, PEng, FSOE(UK), FIPlantE(UK), MIMarEST(UK), CEng. MASHRAE. ---------- Forwarded message ---------- From: Dr Amir Khalid <amirk@uthm.edu.my> Date: Sun, Jul 12, 2015 at 9:11 PM Subject: [CFDRI2015] Editorial Decision on Paper To: Prof Dr Farid Nasir Ani <farid@mail.fkm.utm.my> Cc: Muhammad Anshar <M.Anshar60@yahoo.com>, Ab Saman Kader <abdsaman@fkm.utm.my>, azian@uthm.edu.my, norzela@uthm.edu.my Prof Dr Farid Nasir Ani: After a careful review of your submission, "CO-COMBUSTION MODELING OF RICE HUSK AND PLASTIC BAG AS ENERGY SOURCE IN INDONESIA" will be considered for presentation at CFDRI2015 if the following revisions are successfully implemented. Thank you and looking forward to your participation in this event. Dr Amir Khalid Universiti Tun Hussein Onn Malaysia amirk@uthm.edu.my ------------------------------------------------------

Reviewer A:

(Q1) Title: Is it adequate and appropriate for the content of the article?: Yes, appropriate. (Q2) Abstract: Does it contain the essential information of the paper? Is it complete? Is it suitable for inclusion by itself in an abstracting service?: No, the author should revise the abstract. (Q3) Diagrams, figures, tables and references: Are they essential and clear?: No, the author should make sure all are readable, captioned and cited in the text. (Q4) Conclusion: Does the paper contain a carefully written conclusion, summarizing what has been learned and why it is interesting and useful?: Yes. (Q5) Originality: Is the work relevant and novel?: Moderate (Q6) Repetition: Have significant parts of the manuscript already been published?: Acceptable (Q7) Scientific merit: notably scientific rigour, accuracy and correctness.: Moderate (Q8) Clarity of expression; communication of ideas; readability and discussion of concepts.: Moderate (Q9) Additional comments to the author: This paper contains a lot of grammatical and spelling errors.

The following sections need to be corrected: 1. Abtract (grammatical) 2. Geometry Model of Furnace... 28.875 nodes? 3. Pg.2, Furnace geometry sentence has duplicate 4. Table-2, format & spacing 5. Figure-2, caption should be in the same column 6. ".. all the water content in RH90 + PB10 turn into gas phase." Water will always be H2O whether it is in liquid or gaseous phase 7. Pg. 4, "... furnace showe..." 8. Figure-5 "Countur" 9. References, font sizes 4. ------------------------------------------------------ ------------------------------------------------------

Reviewer B:

(Q1) Title: Is it adequate and appropriate for the content of the article?: Yes, appropriate. (Q2) Abstract: Does it contain the essential information of the paper? Is it complete? Is it suitable for inclusion by itself in an abstracting service?: Yes, can be accepted as it is. (Q3) Diagrams, figures, tables and references: Are they essential and clear?: No, the author should make sure all are readable, captioned and cited in the text. (Q4) Conclusion: Does the paper contain a carefully written conclusion, summarizing what has been learned and why it is interesting and useful?: Yes. (Q5) Originality: Is the work relevant and novel?: Moderate (Q6) Repetition: Have significant parts of the manuscript already been published?: Acceptable (Q7) Scientific merit: notably scientific rigour, accuracy and correctness.: Moderate (Q8) Clarity of expression; communication of ideas; readability and discussion of concepts.: Very good (Q9) Additional comments to the author: Dear authors, i personally think that this is an interesting paper to share the findings. However, minor correction is required in this paper. Please allow me to share a few comments about this paper: 1. Kindly please re-arrange/align Table 2 in proper row and column. 2. Please check the wording for figure 2, where it should be close to the picture. 3. The graph for figure 2 seem like your expending the picture by not considering the ratio. I appreciate if your can replace with a proper quality and actual size for better illustration. 4. The authors are recommended to explain important symbol in presented equations. I believed that some of reference books are using different symbol and meaning. 5. Please provide some validation analysis to support your simulation works. Pending to attention and response to the comments above, I recommend this manuscript to be accepted. ------------------------------------------------------ ------------------------------------------------------

Reviewer C:

(Q1) Title: Is it adequate and appropriate for the content of the article?: Yes, appropriate. (Q2) Abstract: Does it contain the essential information of the paper? Is it complete? Is it suitable for inclusion by itself in an abstracting service?: Yes, can be accepted as it is. (Q3) Diagrams, figures, tables and references: Are they essential and clear?: Yes.

(Q4) Conclusion: Does the paper contain a carefully written conclusion, summarizing what has been learned and why it is interesting and useful?: Yes. (Q5) Originality: Is the work relevant and novel?: Moderate (Q6) Repetition: Have significant parts of the manuscript already been published?: Acceptable (Q7) Scientific merit: notably scientific rigour, accuracy and correctness.: Moderate (Q8) Clarity of expression; communication of ideas; readability and discussion of concepts.: Very good (Q9) Additional comments to the author: 1. Figure must be inserted immediately after the citation in the text. 2. Title of Figure 2 was shifted to the other column . ------------------------------------------------------ ---------------------------------------------------------------------------------

Reviewer’s Report

----------------------------------------------------------------------------- 1. Please follow the conference format. The AuthorTemplate.doc (refer to conference website)( http://cfdri.uthm.edu.my/index.php/paper-submission/author-guidelines) has incorporated the paper format for ARPN Journal of Engineering and Applied Sciences. Follow the author’s guidelines as written in the author ARPN template. This is to make sure your paper will be included in the ARPN journal. 2. The corresponding author should prepare the final version of the paper. The format must be .doc or docx. 3. Each paper is normally between 5 to 8 pages, and additional pages might be charged. Please follow the Conference format. Authors who would like to publish articles with extra pages in CFDRI 2015; the additional cost is USD 30 per page after the 8th page. Papers less than 5 pages should not be submitted. 4. The abstract of the paper should contain the motivation/problem statement, aims, methods, results and conclusion. 5. Introduction should contain the literature review, research background, problem statement, objective, scope and summary of research methodology. 6. All figures and tables must be clear and readable and also references MUST be cited in the text. 7. The corresponding author (the paper submitter) should upload the final version and register as indicated in the acceptance letter. 8. The manuscript needs to be edited for grammar and syntax. Amir Khalid, Dr. Eng. Department of Plant and Automotive Engineering, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat, Johor, Malaysia. https://community.uthm.edu.my/amirk http://scholar.google.com.my/citations?user=NFLDTQIAAAAJ&hl=en&oi=ao http://www.scopus.com/authid/detail.url?authorId=55655797100 ______________________ ________________________________________________________________________ CFDRI2015 International Conference on Computational Fluid Dynamics in Research and Industry 2015 (CFDRI 2015) http://cfdri.uthm.edu.my http://myconferences.org/index.php/cfdri2015/cfdri2015/index

PENERIMAAN:

Dokumen penerimaan terlampir.

PENJELASAN JURNAL

1. ARPN Journal of Engineering and applied science Scimago:

Jurnal ini mempunyai Quartil Q3 dalam Scimagojr. Berikut penjelasannya:

2. Editorial Board:

Editorial Board

Editor-in-Chief: Engr. J. K. Tarakzai (PAKISTAN)

# Editors Country

1 Prof. Dr. R. J. Godwin UNITED

KINGDOM

2 Prof. Dr. Erik Valdemar Cuevas Jimenez GERMANY

3 Prof. Dr. Hamou SADAT FRANCE

4 Dr. Mohammad Aminul Islam JAPAN

5 Prof. Dr. Kui Fu Chen CHINA

6 Prof. Dr. M. Ashraf Chaudhry NEW ZEALAND

7 Prof. Dr. A. Sermet Anagun TURKEY

8 Prof. Dr. Ashraf Mohamed Hemeida Saudi Arabia

9 Prof. Dr. Krishna Murari Pandey INDIA

10 Prof. Dr. Magdy A. Ezzat EGYPT

11 Prof. Dr. Roberto Brighenti ITALY

12 Dr. Anurag Misra INDIA

13 Prof. Dr. Adel M. ALIMI TUNISIA

14 Prof. Dr. Arun Kumar Gupta INDIA

15 Prof. Demetrios V. Bandekas GREECE

16 Prof. Dr. Bensafi Abd-El-Hamid ALGERIA

17 Dr. Rajanish K. Kamat INDIA

18 Prof. Dr. Asma Thamir Ibraheem IRAQ

19 Prof. Dr. Sylejman Hyseni KOSOVO

20 Prof. Dr. Haider Zaman Saudi Arabia

21 Prof. Dr. Debojyoti Mitra INDIA

22 Prof. Dr. Pandian VASANT MALAYSIA

23 Prof. Dr. Prakash MMS Kinthada INDIA

Associate Editors

1 Dr. Dongning Li USA

2 Dr. Suheyla Yerel TURKEY

3 Dr. Guoxiang Liu USA

4 Dr. Nadeem Anjum PAKISTAN

5 Engr. Malini Sarah Philip NORWAY

6 Dr. K.V.L.N. Acharyulu INDIA

7 Engr. Mohammad Khalily Dermany IRAN

8 Dr. Lamyaa- Gamal Eldeen Taha EGYPT

9 Dr. OM Prakash Singh INDIA

10 Engr. Seyyed Mohammad Reza Farshchi IRAN

11 Dr. Muhammad Imran Din PAKISTAN

12 Dr. José Carlos Páscoa Marques PORTUGAL

13 Engr. Fawwaz Jinan Jibrael Jabri IRAQ

14 Dr. Kanad Ray INDIA

15 Dr. Shamsuddin Shahid MALAYSIA

16 Engr. Naveenji Arun INDIA

Re: CFDRI 2015 Publication Status (12 April 2017)

Dari: Dr Mohammad Kamil Abdullah (mkamil@uthm.edu.my)

Kepada: saifull@uthm.edu.my; rosna@uthm.edu.my; hazimfadli91@gmail.com; wira_18@yahoo.com; nkching@uniten.edu.my;n_hazirah1110@yahoo.com; A_moradi81@hotmail.com; alamj@mun.ca; nabakar.math@gmail.com; abdulmdk119@gmail.com;alireza_gharakhany@yahoo.com; farids@uthm.edu.my; hadeel.ghalib8876@gmail.com; mohammad.nasif@petronas.com.my;samban.mech@gmail.com; eypasakri@gmail.com; nurshafinazmohdmaruai@yahoo.com; yasar248@gmail.com;n.pormahmod@urmia.ac.ir; mfarid@fkm.utm.my; sufiahsalleh90@gmail.com; amiroloomi@iauyazd.ac.ir; fadhli@uthm.edu.my;mohammad@psas.edu.my; najahulfazliah@gmail.com; raedabbas2014@yahoo.com; nazrihuzaimi@utem.edu.my;akmaln@uthm.edu.my; gd1400@siswa.uthm.edu.my; ekyvalen@gmail.com; izzudinshah32@yahoo.com; mehaque101@yahoo.com;azamramly@gmail.com; mhafiz_ismail@yahoo.com; bukhari@uthm.edu.my; lyday011@yahoo.com; mhsuan@webmail.nkmu.edu.tw;faridmohamed@ukm.edu.my; mark_ovinis@petronas.com.my; m.anshar60@yahoo.com; mazharul@iium.edu.my;suffian@ums.edu.my; fakhriahmuhsin@yahoo.com; radzi@ukm.edu.my; zulia@uthm.edu.my; iszat@uthm.edu.my;azmah@uthm.edu.myl; arinydemong91@gmail.com; elfatih@uniten.edu.my; sikin@uthm.edu.my; mhramesht@yahoo.com;norhaliza@uthm.edu.my; maselan@uthm.edu.my; rozaini@uthm.edu.my; arashkarimipour@gmail.com; maisarah@iium.edu.my;bambangb@uthm.edu.my; adrian@uthm.edu.my; azmah@uthm.edu.my; mark_ovinis@utp.edu.my

Cc: norzela@uthm.edu.my; azian@uthm.edu.my; fitriah@uthm.edu.my; fawzi@uthm.edu.my

Tanggal: Minggu, 23 April 2017 08.08 GMT+8

Dear respected authors,

As being informed in our previous email, ARPN Journal have started to publish accepted articles at CFDRI 2015 in ARPN Journal ofEngineering and Applied Sciences Vol. 12 No. 7 (10th April 2017) involving nine (9) from fifty two (52) papers. The papers can be access at>>>> http://www.arpnjournals.com/jeas/volume_07_2017

We would to inform you that another batch involving nineteen (19) papers have been published in ARPN Journal of Engineering and AppliedSciences Vol. 12 No. 8 (20th April 2017) which can be access at >>>> http://www.arpnjournals.com/jeas/volume_08_2017.

In total twenty eight (28) from fifty two (52) papers have been published and we are expecting the others to follow in the next publicationexpected to be on 10th May 2017.

We will closely monitor the progress and will keep you updated and once again we are deeply regret the unnecessary inconvenience that thisdelay has caused.

Thank you for your attention on this matter and your continuous support to our conference is highly appreciated.

Sincerely yours

Kamil Abdullah

Publication Team of CFDRI 2015

----- Original Message -----

From: "Dr Mohammad Kamil Abdullah" <mkamil@uthm.edu.my> To: saifull@uthm.edu.my, rosna@uthm.edu.my, hazimfadli91@gmail.com, "wira 18" <wira_18@yahoo.com>, nkching@uniten.edu.my, "n

hazirah1110" <n_hazirah1110@yahoo.com>, "A moradi81" <A_moradi81@hotmail.com>, alamj@mun.ca, "nabakar math"<nabakar.math@gmail.com>, abdulmdk119@gmail.com, "alireza gharakhany" <alireza_gharakhany@yahoo.com>, farids@uthm.edu.my,"hadeel ghalib8876" <hadeel.ghalib8876@gmail.com>, "mohammad nasif" <mohammad.nasif@petronas.com.my>, "samban mech"<samban.mech@gmail.com>, eypasakri@gmail.com, nurshafinazmohdmaruai@yahoo.com, yasar248@gmail.com, "n pormahmod"<n.pormahmod@urmia.ac.ir>, mfarid@fkm.utm.my, sufiahsalleh90@gmail.com, amiroloomi@iauyazd.ac.ir, fadhli@uthm.edu.my,mohammad@psas.edu.my, najahulfazliah@gmail.com, raedabbas2014@yahoo.com, nazrihuzaimi@utem.edu.my, "Dr Akmal NizamMohammed" <akmaln@uthm.edu.my>, gd1400@siswa.uthm.edu.my, ekyvalen@gmail.com, izzudinshah32@yahoo.com,mehaque101@yahoo.com, azamramly@gmail.com, "mhafiz ismail" <mhafiz_ismail@yahoo.com>, bukhari@uthm.edu.my,lyday011@yahoo.com, mhsuan@webmail.nkmu.edu.tw, faridmohamed@ukm.edu.my, "mark ovinis" <mark_ovinis@petronas.com.my>, "manshar60" <m.anshar60@yahoo.com>, mazharul@iium.edu.my, suffian@ums.edu.my, fakhriahmuhsin@yahoo.com, radzi@ukm.edu.my,zulia@uthm.edu.my, iszat@uthm.edu.my, azmah@uthm.edu.myl, arinydemong91@gmail.com, elfatih@uniten.edu.my, "Dr Norasikin MatIsa" <sikin@uthm.edu.my>, mhramesht@yahoo.com, norhaliza@uthm.edu.my, maselan@uthm.edu.my, rozaini@uthm.edu.my,arashkarimipour@gmail.com, maisarah@iium.edu.my, "Dr Bambang Basuno" <bambangb@uthm.edu.my>, "Nor Adrian Nor Salim"<adrian@uthm.edu.my>, "Azmahani Sadikin" <azmah@uthm.edu.my>, "mark ovinis" <mark_ovinis@utp.edu.my>

Cc: "P Madya Dr Norzelawati Asmuin" <norzela@uthm.edu.my>, "Dr Azian Hariri" <azian@uthm.edu.my>, "Dr Nurul Fitriah Nasir"<fitriah@uthm.edu.my>, "P Madya Dr Mas Fawzi Mohd Ali" <fawzi@uthm.edu.my>

Sent: Wednesday, 12 April, 2017 10:33:17 Subject: CFDRI 2015 Publication Status (12 April 2017)

Dear respected authors,

In this opportunity we would like to inform you that ARPN Journal have started to publish accepted articles at CFDRI 2015 in ARPN Journalof Engineering and Applied Sciences Vol. 12 No. 7 (10th April 2017).

So far 9 from 52 articles have been published and we are expecting the others to follow in the next publication expected to be at 20th April2017. The published articles can be access at

>>>> http://www.arpnjournals.com/jeas/volume_07_2017 We will closely monitor the progress and will keep you updated and once again we are deeply regret the unnecessary inconvenience that thisdelay has caused.

Thank you for your attention on this matter and your continuous support to our conference is highly appreciated.

Sincerely yours

Kamil Abdullah

Publication Team of CFDRI 2015

----- Original Message -----

From: "Dr Mohammad Kamil Abdullah" <mkamil@uthm.edu.my> To: saifull@uthm.edu.my, rosna@uthm.edu.my, hazimfadli91@gmail.com, "wira 18" <wira_18@yahoo.com>, nkching@uniten.edu.my, "n

hazirah1110" <n_hazirah1110@yahoo.com>, "A moradi81" <A_moradi81@hotmail.com>, alamj@mun.ca, "nabakar math"<nabakar.math@gmail.com>, abdulmdk119@gmail.com, "alireza gharakhany" <alireza_gharakhany@yahoo.com>, farids@uthm.edu.my,"hadeel ghalib8876" <hadeel.ghalib8876@gmail.com>, "mohammad nasif" <mohammad.nasif@petronas.com.my>, "samban mech"<samban.mech@gmail.com>, eypasakri@gmail.com, nurshafinazmohdmaruai@yahoo.com, yasar248@gmail.com, "n pormahmod"<n.pormahmod@urmia.ac.ir>, mfarid@fkm.utm.my, sufiahsalleh90@gmail.com, amiroloomi@iauyazd.ac.ir, fadhli@uthm.edu.my,mohammad@psas.edu.my, najahulfazliah@gmail.com, raedabbas2014@yahoo.com, nazrihuzaimi@utem.edu.my, "Dr Akmal NizamMohammed" <akmaln@uthm.edu.my>, gd1400@siswa.uthm.edu.my, ekyvalen@gmail.com, izzudinshah32@yahoo.com,mehaque101@yahoo.com, azamramly@gmail.com, "mhafiz ismail" <mhafiz_ismail@yahoo.com>, bukhari@uthm.edu.my,lyday011@yahoo.com, mhsuan@webmail.nkmu.edu.tw, faridmohamed@ukm.edu.my, "mark ovinis" <mark_ovinis@petronas.com.my>, "manshar60" <m.anshar60@yahoo.com>, mazharul@iium.edu.my, suffian@ums.edu.my, fakhriahmuhsin@yahoo.com, radzi@ukm.edu.my,zulia@uthm.edu.my, iszat@uthm.edu.my, azmah@uthm.edu.myl, arinydemong91@gmail.com, "Dr Mohammad Kamil Abdullah"<mkamil@uthm.edu.my>, elfatih@uniten.edu.my, "Dr Norasikin Mat Isa" <sikin@uthm.edu.my>, mhramesht@yahoo.com,norhaliza@uthm.edu.my, maselan@uthm.edu.my, rozaini@uthm.edu.my, arashkarimipour@gmail.com, maisarah@iium.edu.my, "DrBambang Basuno" <bambangb@uthm.edu.my>, "Nor Adrian Nor Salim" <adrian@uthm.edu.my>

Cc: "P Madya Dr Norzelawati Asmuin" <norzela@uthm.edu.my>, "Dr Azian Hariri" <azian@uthm.edu.my>, "Dr Nurul Fitriah Nasir"<fitriah@uthm.edu.my>, "P Madya Dr Mas Fawzi Mohd Ali" <fawzi@uthm.edu.my>

Sent: Wednesday, 1 February, 2017 10:52:28 Subject: CFDRI 2015 Publication Status

Dear respected authors,

In this opportunity we would like to provide you an update on the current publication status of your submission to the CFDRI 2015Conference.

The following are the chronological details of the publication process from the time of your submission to the conference:

1. Agreement Date Between CFDRI 2015 and ARPN Journal : 08 Feb 2015 2. Issuance of Paper Template and Copyright Form from ARPN Journal : 04 Jun 2015 (most of the papers have been submitted in different

format) 3. Deadline of Full Paper : 28 Jun 2015

4. Conference Date : 18 Ogos 2015 5. Notification of Camera-Ready Papers to ARPN Journal : 17 Jan 2016 (time required for re-submission from authors based on the new

format) 6. Invoice Date from ARPN Journal : 01 Ogos 2016

7. Invoice Payment Date to ARPN Journal : 14 Ogos 2016 8. Publication Date : Still waiting feedback from ARPN Journal

We deeply regret the unnecessary inconvenience that this delay has caused. As our pledge, we will make endless efforts to ensure that theconference proceedings will be published as planned.

Thank you for your attention on this matter. Your continuous support to our conference is highly appreciated.

Yours sincerely

Kamil Abdullah

Publication Team of CFDRI 2015

CONFIDENTIALITY NOTICE: This e-mail contains confidential information, which is intended only for the use of the recipient(s) namedabove. If you have received this communication in error, please notify the sender immediately via e-mail and return the entire message.

Please email to abuse @ uthm.edu.my if you found this email to be fraud.

University Tun Hussein Onn Malaysia | www.uthm.edu.my